[WriteLog] Appended messages reduces power out!

[Mike <k4gmh@arrl.net>]

Hello,

Problem, when two function key messages are appended, the instant the 
second function key is hit, the xcvr's power shuts off for a fraction of a 
second and then goes to about 1/2 power.  If the second function key is not 
pressed until the first function key message has been sent and transmitting 
has stopped, full output remains.  If the xcvr is just sending diddles full 
power is sent out until transmit is manually stopped.  Doesn't matter which 
two function keys are sequenced, the problem is still there.  Using AFSK 
.  The ALC is within the acceptable range when the initial function key 
message is being transmitted.  Using WL10.52D, but this problem occurred 
with10.51 as well.

XCVR is IC746.

Did change computer but using the same sound card, ISA SB16, and using 
RITTY as the RTTY engine.  This arrangement did work (output power didn't 
drop off when appended function keys were actuated) with the previous 
computer.  Both computers run 98SE.

Any ideas on what to try to get rid of this problem by RR?

        73,
        Mike, K4GMH 


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/