I have not had any success doing telnet with DX4WIN. I am running
5.0.3 so that might be the problem.
Dick
On Mon, 17 Jan 2005 12:35:57 -0800 (PST), Jim Reisert AD1C
<jjreisert@alum.mit.edu> wrote:
> Can more than one program connect to the VE7CC client at the same time? It
> would make a nice solution to being able to run DX4WIN and Writelog connected
> to the same cluster.
>
> --- Richard Zalewski <dick.w7zr@gmail.com> wrote:
>
> > I have been using VE7CC's AR Cluster software and no problem with
> > writelog. I open the AR software, connect to N7US or any other
> > cluster and then open writelog. When Writelog opens In the packet
> > terminal window I select file|telnet and then the ip address of
> > 127.0.0.1 with port 7300. (Sometimes the telnet address window opens
> > up under the writelog window so you have to minimize writelog first to
> > see if it is there.)
>
>
> =====
> Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
> USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.us
>
--
Tnx es 73
Dick W7ZR
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|