I forgot to say this only happens using the memory F keys in writelog. The
key paddles to the radio work fine..
73
Frank KL7FH
432 EME
16X12 ele Polarity rotation
FT-847 700W
KA0RYT 0.18 N/F Preamp
http://www.qsl.net/kl7fh
----- Original Message -----
From: "Frank Hurlbut" <kl7fh@gci.net>
To: "Philip Theis" <phil@k3tuf.com>; <writelog@contesting.com>
Sent: Tuesday, August 09, 2005 3:40 PM
Subject: Re: [WriteLog] MK1100
>I have had the same problem with my station using CW and writelog. I have 2
> Yaesu MKV Fields networked using windows xp and 98. The CW key is using
> the
> Parallel ports. I have asked about this months ago and still haven't found
> a
> solution. none of the suggestions have worked yet. The CW is intermittent
> erratic. Sometimes a DAH will hold for 2 or 3 seconds then comtinue on
> fine.
> Most of the time it works fine. This happened after doing a recent
> upgrade.
> No hardware was changed and no new programs loaded to effect IRQ's or
> memory
> usage. The network is dedicated to writelog and radios. Something is wrong
> in the writelog code. I am very interested in getting any fix that is
> produced.
> 73
> Frank KL7FH
> 432 EME
> 16X12 ele Polarity rotation
> FT-847 700W
> KA0RYT 0.18 N/F Preamp
> http://www.qsl.net/kl7fh
> ----- Original Message -----
> From: "Philip Theis" <phil@k3tuf.com>
> To: <writelog@contesting.com>
> Sent: Tuesday, August 09, 2005 3:12 PM
> Subject: [WriteLog] MK1100
>
>
>>I used my MK1100 for the first time in the past UHF contest and was very
>> pleased with the automatic operation of SO2R, particularly the ability
>> to have automatic frequency selection via the two parallel ports with
>> frequency data. I have them interfaced to all of my transverters.
>>
>> BUT, something seemed wrong with my cw. It was erratic, sometimes
>> skipping a beat. During the contest I attributed it to a possibly
>> flakey key paddle. Now with additional testing I find that even if I
>> complete the circuit manually the string of both dits and dahs come out
>> erratic. In other words, if I short the dits side so that all I get is
>> a constant stream of dits, they come out repeatedly erratic. Same for
>> the dah side.
>>
>> Any clues?? Bad setting?
>>
>> Thanks
>> Phil K3TUF
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|