Dennis,
You need to add the 8.83 500hz filter and have them cascaded. This will
restore the functionality of the two slope tunes. Makes for a really nice
and tight filter too. Add the 270HZ from Inrad and you'll be In Like Flynn
(pun intended).
Charlie
KI5XP
> Date: Mon, 20 Mar 2006 19:44:41 -0000
> From: "Denis O' Flynn" <ei6hb@eircom.net>
> Subject: [WriteLog] QRM
> To: <writelog@contesting.com>
> Message-ID: <015101c64c56$bb4bc000$1662a8c0@p4>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Ho Folks,
> I hope somebody can help me with my problem
>
> I am using my Kenwood 850S with MMTTY and WL 10.55D. When
> doing the last few RTTY contests I find I cant get rid of
> adjacent signals. I use the 2.7kfilter on the 8.33 and the
> 500 on the 455. I have to turn the Low Cut Slope Tune nearly
> fully clockwise and the High Cut slightly anticlockwise in
> order to be able to copy anything. This is real annoying !!
> especially on 40M.
>
> I am assuming that I am doing something really wrong here and
> would like the groups advise.
>
> I find this a great list for learning new things about this
> fab piece of software.
>
> de Denis
> EI6HB
*
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|