WriteLog
[Top] [All Lists]

Re: [WriteLog] RIG INI FILE

To: KR4DA <kr4da@bellsouth.net>, <writelog@contesting.com>
Subject: Re: [WriteLog] RIG INI FILE
From: <pa3k@vip.hr>
Date: Tue, 3 Oct 2006 22:18:13 +0200
List-post: <mailto:writelog@contesting.com>
Hello, try this utility :
http://www.kregli.com/wliniedit.htm

73 de Patrik 9A5CW

> 
> Od: KR4DA <kr4da@bellsouth.net>
> Datum: 2006/10/03 uto PM 10:11:32 CEST
> Za: writelog@contesting.com
> Naslov: Re: [WriteLog] RIG INI FILE
> 
> Nothing here about using the TEXT editor to ENTER THESE MANUALLY
> 
> I do not want to assume I have to do this.
> THEY SHOULD already be part of the INI file
> then EDIT as needed. If I really have to edit this in
> fine.  Something isn't right.....................
> I mean PORTS AND RIGS SHOULD ALREADY BE THERE
> I would  assume from reading these would be in the INI file.
> I have  no settings in the  eluded to [RIGS] section as stated my the 
> below statement.
> 
> ####The COMn:= settings are used by the WriteLog Packet window and by 
> the RTTY window. There are separate COMn: settings in the [RIGS] section 
> used only for rigs.####
> 
> The settings from the Setup Ports <cs_dlg_ports.htm> dialog:
> 
> dvkport=2 
> dvktype=2 
> cwtype=3 
> cwport=1
> AntRelayOnLpt3=YES,1 
> AntRelayonLPT1=YES
> Comm1Used=CW,0
> 
> The COMn:= settings are used by the WriteLog Packet window and by the 
> RTTY window. There are separate COMn: settings in the [RIGS] section 
> used only for rigs.
> 
> COM1:=9800,n,8,1,
> COM2:=4800,e,7,1,
> 
> There are 4 "slots" available for WriteLog rig interfacing. By default, 
> CommSlot1 is COM1:, but you can change that by changing the number on 
> the right of the equal sign. These settings are not used for RTTY or for 
> packet
> 
> CommSlot1=1
> CommSlot2=2
> 
> In this example, the third and fourth slots are on COM7 and COM8. COM15 
> is as high as is supported.
> 
> CommSlot3=7
> CommSlot4=8
> 
> 
> 
> k0bx@arrl.net wrote:
> 
> >The Writelog.ini file has a lot of options.  But you
> >have to put those options in the file using a text
> >editor.  Writelog will only put the necessary options
> >in the ini file.
> >
> >I know it is hard for hams to do, but RTF, Read the
> >Manual, on the main logging screen, click on HELP.
> >
> >Then click INDEX.
> >
> >Then Click PORTS - Read it.
> >
> >Then Click RIGS - Read it.
> >
> >It will answer most of your questions.
> >
> >Joe K0BX
> >
> >
> >--- KR4DA <kr4da@bellsouth.net> wrote:
> >
> >  
> >
> >>I do not see a [RIG] in the ini file.
> >>
> >>No com port selections..
> >>
> >>WHY???
> >>
> >>-- 
> >>de KR4DA Bob Middleburg, FL
> >>HK0/KR4DA J79DA FG/KR4DA
> >>
> >>
> >>_______________________________________________
> >>WriteLog mailing list
> >>WriteLog@contesting.com
> >>
> >>    
> >>
> >http://lists.contesting.com/mailman/listinfo/writelog
> >  
> >
> >>WriteLog on the web:  http://www.writelog.com/
> >>
> >>    
> >>
> >
> >_______________________________________________
> >WriteLog mailing list
> >WriteLog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/writelog
> >WriteLog on the web:  http://www.writelog.com/
> >
> >  
> >
> 
> -- 
> de KR4DA Bob Middleburg, FL
> HK0/KR4DA J79DA FG/KR4DA
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>