Mark,
This is often caused by the radio being in a ssb mode. On the Bands menu,
click on "LSB is really FSK" and see if this helps.
Jerry, W6IHG
At 10:31 PM 10/16/2006 -0500, Mark Klocksin wrote:
>A few weeks ago, I configured my station so I could run FSK with
>MMTTY and WriteLog. It's working beautifully. The computer is a HP
>Pavilion, and the software is WriteLog with the MMTTY plug-in, and
>MMTTY with ext fsk.
>
>Bolstered by this success, I volunteered to set up a portable station
>for our club. I spent some hours tonight installing the K5WW DB-9
>Pin 3 TXD mod. to a RigBlaster Nomic interface connected to a Dell
>laptop. The Dell has two Keyspan USB to serial converters. The COM
>ports are 5 and 6. Port 5 is connected to the rig, and port 6 is
>being used for PTT/FSK. After I finished the modification, I was
>really pleased when I booted MMTTY/ext.fsk and it everything worked!
>The rig was transmitting beautiful FSK! I thought I was all set.
>
>However, when I booted WriteLog/MMTTY, all I get is a steady tone
>when I key the rig. No diddles! I compared all the screens I could
>find between my station computer and the Dell laptop, but they looked
>the same. I'm hoping there's something simple I'm overlooking.
>
>Any ideas?
>
>73 es tnx Mark WA9IVH
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web: http://www.writelog.com/
------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|