WriteLog
[Top] [All Lists]

Re: [WriteLog] LPT Ports and directio

To: <writelog@contesting.com>
Subject: Re: [WriteLog] LPT Ports and directio
From: "David Hachadorian" <k6ll@adelphia.net>
Date: Sat, 11 Nov 2006 18:59:03 -0000
List-post: <mailto:writelog@contesting.com>
----- Original Message ----- 
From: "Clive Whelan" <clive.whelan@btinternet.com>
To: <writelog@contesting.com>
Sent: Saturday, November 11, 2006 6:52 PM
Subject: [WriteLog] LPT Ports and directio


> Even after a successful installation of directio, all the
> LPT port check boxes are still greyed out in the WL
> configuration dialogue. What might be wrong?

Try K2QMF's procedure:
1 - Open the Direct I/O control panel.
2 - In the I/O Ports Tab enter the BEGIN and END address.
      For LPT1 it is  378  and  37A.
3 - Click ADD button ( This is the step they left out)..
4 - Go to the SECURITY Tab
5 - Click BROWSE button and locate writelog directory.
6 - From there locate writelog\Programs\WriteL32.exe and 
click OPEN
7 - Click ADD.
8 - Close Control Panel...
Dave Hachadorian, K6LLYuma, AZ 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>