WriteLog
[Top] [All Lists]

Re: [WriteLog] SO2R with Writelog

To: "'Richard L. King'" <k5na@ecpi.com>, <writelog@contesting.com>
Subject: Re: [WriteLog] SO2R with Writelog
From: "Eric - VE3GSI" <ve3gsi@sympatico.ca>
Reply-to: ve3gsi@canada.com
Date: Mon, 11 Feb 2008 11:42:33 -0500
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Richard,

I noted in another post you mentioned you use PC generated CW. Set-up with
the WinKey option try again. 

I have run CW SO2R with the mH SO2R+ Keyer and don't remember your problem
when set-up with the WinKey option. I am pressed for time today, but as soon
as I can I will check your findings here and get back to you - most likely
direct if that is ok with you.

73 Eric.



> -----Original Message-----
> From: Richard L. King
> Sent: February 10, 2008 11:03 PM
> 
> I need some help again to make something work on my MK2R+ with 
> Writelog. I had this problem a year ago, but was told that it should 
> work when Writelog implements support for the MK2R.
> 
> Now I am running Writelog 10.65C that should have support for the 
> MK2R but the problem is still there. Here is what happens.
> 
> I have a CQ TEST in F1.
> 
> I have "K5NA" in F4.
> 
> I am running in SO2R mode and using auto repeat (3 seconds) and auto 
> resume to send the F1 CQ on radio one.
> 
> The headphones are switching and I am listening on radio two when 
> transmitting on radio one.
> 
> I use the "shift arrow" key to move the keyboard focus from radio one 
> to radio two. Radio one continues to call CQ with the transmit focus 
> still there.
> 
> I decide to drop my call in on radio two using the F4 key.
> 
> This is where things go wrong.
> 
> When I hit F4, radio one only stops for an instant. The PTT switches 
> to radio two and then immediately back to radio one. Nothing is sent 
> on radio two even though the PTT was made briefly.
> 
> Radio one has immediately started CQing again. When that CQ completes 
> there is no pause and another CQ starts immediately. Then, finally, 
> after the second CQ the 3 second delay will be injected between CQs 
> again. Then it starts CQing normally with the 3 second delay 
> between CQs again.
> 
> With the auto CQ and auto resume on, I cannot send on the second 
> radio by moving the keyboard focus there.
> 
> Is there something that I have missed in the Router or Writelog that 
> makes this work correctly? I have been playing with settings and 
> reading material and I can't get any ideas.
> 
> I am cross posting this to Microham in case it is a MK2R or 
> Router issue.
> 
> 73, Richard - K5NA

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>