WriteLog
[Top] [All Lists]

Re: [WriteLog] Writelog: FT2000 on MicrokeyerII not recognized - NEEDHEL

To: "'Wolf, DK1FW'" <dk1fw@gmx.de>, <writelog@contesting.com>
Subject: Re: [WriteLog] Writelog: FT2000 on MicrokeyerII not recognized - NEEDHELP
From: "Joe Subich, W4TV" <lists@microham-usa.com>
Reply-to: microham@microham-usa.com
Date: Thu, 4 Dec 2008 18:34:56 -0500
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>

> Writelog does not show the FT2000 frequency.
> When clicking the Frequency Window, the message
> "rig on Comm  5" is shown , so WL seems to find Com5
> When the SET button is clicked a "No rig" message results.

When WriteLog starts, Does Router show "open 4800 8N2" in 
the CAT port?  If not, WriteLog is not opening the correct 
port. 

> In the RIGS section of Writelog.ini I have
> Com5: =4800,n,8,2

I do not believe there should be a space between COM5: and 
=4800. 

Have you turned off the handshaking (Menu 29) in the FT2000? 
What handshake options are you using with DXLab/Commander? 
Is WriteLog using the same options? 

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: writelog-bounces@contesting.com 
> [mailto:writelog-bounces@contesting.com] On Behalf Of Wolf, DK1FW
> Sent: Thursday, December 04, 2008 3:52 PM
> To: writelog@contesting.com; microHAM@yahoogroups.com
> Subject: [WriteLog] Writelog: FT2000 on MicrokeyerII not 
> recognized - NEEDHELP
> 
> 
> I recently added an FT2000 and MicrokeyerII / Router 7.2.2 to 
> my station. FT2000 CAT is on COM5 (4800,n,8,2), RTTY on COM6, 
> WinKey on Com7 and CW 
> PTT on Com8.
> That configuration works flawlessly with DXLab under XP SP3.
> 
> As my old version of Writelog supported neither the FT2000 nor the 
> FT9000 I upgrade to WL 10.69D.
> When trying to get WL to communicate with the FT2000  I ran 
> into trouble. After 4 hours of fruitless attempts I am totally lost.
> 
> Router is running and tracks the frequency of the FT2000 on 
> Com5. Writelog is  started after that.
> 
> In the PORTS section of Writelog.ini I have
> CommSlot1=5
> In the RIGS section of Writelog.ini I have
> Com5: =4800,n,8,2
> 
> In the Writelog Ports Setup I have
> Com5 - FT2000 - 4800 - Poll hooked - NO PTT
> 
> CW and DVK are not selected in this initial attempt to establish 
> communication with the rig.
> 
> Writelog does not show the FT2000 frequency.
> When clicking the Frequency Window, the message  "rig on Comm  5" is 
> shown , so WL seems to find Com5
> When the SET button is clicked a "No rig" message results.
> 
> DXLab is not running so there should not be any competition for Com5.
> 
> Writelog worked  perfectly with my  FT1000D using the Com1 to Com3 
> hardware comports of my computer for CAT, FSK and CW keying.
> 
> Any ideas what I might have missed.
> Any ideas what I may done wrong.
> 
> Your help will be greatly appreciated.
> 
> TIA es 73 de Wolf, DK1FW
> 
>                                              
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com 
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>