Here is the announcement Bernd sent out just before the start of the SCC
contest. If you are not sure which SCC module you are running I'm sure it
is the original one by SM6SRW as you would have had to go to Bernd's web
site and download his new version. If you install this update I think you
find your cursor problem jumping back to the CALL field is fixed. As for
your other problems it appears to be a different issue with the radio
sending diddles. I do not run SO2R so cannot be of much assistance there.
I don't believe capital letters after %C should make a difference as I use
capitals all the time in my RTTY messages without a problem.
Sorry I can't be of more help.
73,
Gary AL9A
----- Original Message -----
From: "Bernd DC3HB" <dc3hb@freenet.de>
To: <writelog@contesting.com>
Sent: August 27, 2010 2:19 AM
Subject: [WriteLog] new WL module for the upcomming SCC RTTY
>Hello RTTY Contesters,
>
>here is an information for the upcomming SCC.
>
>I have written an update of the SCC RTTY module from SM6SRW some years ago.
>SM6SRW's module has some disadvantages and minor bugs. >Robert, S57AW have
>extensively tested this module. Subsequently I have made some slight
>changes. My module replaces the SCC module written by >SM6SRW. The
>Installer deinstall the SCC multiplier modul from SM6SRW if installed.
>
>You can download this module on http://www.dc3hb.net
>
>some changes
>
>(1) klicking callsign or year
>
>Original:
>In this module while clicking the text is alternately inserted between CALL
>and Year. If the callsign is wrong and it is clicked again, the callsign
>goes to the >year field (the digit from callsign). If the year is wrong and
>you click it again, it will go to the CALL field.
>
>DC3HB:
>If you click a callsign, it goes always to the CALL field and if you click
>a number it goes always to the YEAR field.
>
>(2) 7K - 7N (for calculating points)
>
>Original: 7K3 -> JA3 ; 7L5 -> JA5
>
>DC3HB: 7K - 7N -> JA1
>
>(3) new (DC3HB):
>
>- 5 new columns Multi 80, 40, 20, 15, 10
>- appropriate categories in the cabrillo header
>- cabrillo format is now compatible with the rules
>- contest setup option for proper scoring
> (year and call area setup for K, VE, JA, VK, ZL, ZS, PY)
>- valid years: 1900 - current year
>
>
>73 Bernd, DC3HB
>
----- Original Message -----
From: "Stein Roar LA6FJA-K3RAG" <s-roabr@online.no>
To: "Gary AL9A" <al9a@mtaonline.net>; "'Writelog Reflector'"
<writelog@contesting.com>
Sent: August 30, 2010 3:29 PM
Subject: SV: [WriteLog] SCC RTTY : Bug in the + Key
> Hi
> I am not sure if I have DC3HB or SM6SRW version..how cna I find out..
>
> NB! Can it be that I have capital letters after %C, so writelog believe it
> looking for a command string which not excists ??
>
> I played with many setting, and suddenly it appear now and then in also
> different other RTTY conteststoo..not only SCC; but it happened all the
> time now this time...
>
> IT is very annoying if you listening to music or while working RTTY SO2R
> and are busy reading on 2nd Radio.. then you see that the Radio just
> standby didling...until I rehit the TU button or +.
>
>
> 73 LA6FJA Rag
>
>
>> From: Gary AL9A [al9a@mtaonline.net]
>> Sent: 2010-08-30 19:11:01 MEST
>> To: 'Writelog Reflector' [writelog@contesting.com]
>> Subject: Re: [WriteLog] SCC RTTY : Bug in the + Key
>>
>> I'm not sure about the possible + key bug, but I did not experience the
>> cursor jumping back to the CALL field problem you describe. I ran 10.78K
>> for the SCC contest and just upgraded to 10.79D, but when I type in the
>> Year
>> number the cursor just sits at the end of the Year field right after the
>> last digit and does not jump back to the CALL field. What SCC module are
>> you using? The original SM6SRW module or the new updated version from
>> Bernd
>> DC3HB? I installed Bernd's new module just before the SCC so perhaps
>> there
>> is a difference between how the two versions handle the cursor when
>> typing
>> in the Year field.
>>
>> 73,
>> Gary AL9A
>>
>> ----- Original Message -----
>> From: "Stein Roar Brobakken" <s-roabr@online.no>
>> To: "'Writelog Reflector'" <writelog@contesting.com>
>> Sent: August 30, 2010 3:17 AM
>> Subject: [WriteLog] SCC RTTY : Bug in the + Key
>>
>>
>> > Hi
>> > During SCC contest I got a bug in writelog 10.77H.
>> > When I had a QSO going on and if do this procedure
>> > 1. Typed Callsign
>> > 2. Pushed INS
>> > 3. Typed Year
>> > 4. Writelog cursor jumped back to callsign field
>> > 5. Push +
>> > 6. Writelog sends only his callsign and standby didling...
>> >
>> > 7. if I push space so the cursor are in the year field
>> > 8. Re hit + Again.. the it sends complete + macro.
>> >
>> > I donno if this is something to do with bug ?
>> > I have also seen this before... this time it annoyed too much
>> > My + String was : %C TU de LA6FJA QRZ? TEST %E %R
>> > Also I tried only %C de LA6FJA TEST %E % R
>> >
>> > Same story!
>> >
>> > 73 LA6FJA Rag
>> >
>> >
>> >
>> > _______________________________________________
>> > WriteLog mailing list
>> > WriteLog@contesting.com
>> > http://lists.contesting.com/mailman/listinfo/writelog
>> > WriteLog on the web: http://www.writelog.com/
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|