WriteLog
[Top] [All Lists]

Re: [WriteLog] Erratic CW using FTDI USB serial port

To: "Darren Collins \(G0TSM\)" <daz@g0tsm.com>, Mark Klocksin <mpklocksin@ameritech.net>
Subject: Re: [WriteLog] Erratic CW using FTDI USB serial port
From: Jim Harris <jim.w0em@yahoo.com>
Date: Mon, 1 Apr 2013 13:37:17 -0700 (PDT)
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Hi,
Some of those plug in cards with a serial port use an FTDI USB to serial 
conversion chip.  They have the same problem as a cabled converter.  Been 
there, done that, still got the useless card laying around here some place.

Take pride in the USA. 73



Jim, W0EM

--- On Mon, 4/1/13, Mark Klocksin <mpklocksin@ameritech.net> wrote:

From: Mark Klocksin <mpklocksin@ameritech.net>
Subject: Re: [WriteLog] Erratic CW using FTDI USB serial port
To: "Darren Collins (G0TSM)" <daz@g0tsm.com>
Cc: writelog@contesting.com
Date: Monday, April 1, 2013, 6:05 PM

Just a thought, Darren.  

Does your laptop accept any plug-in cards?  (e.g. PCMCIA?)  If so, you could 
purchase one inexpensively online.  These give you one or more "native" serial 
ports.  


73, Mark 




On Apr 1, 2013, at 10:47 AM, "Darren Collins (G0TSM)" <daz@g0tsm.com> wrote:

> Hi all,
> I have a G4ZLP digimaster pro+ which is basically an opto-isolator driven 
> from an FTDI USB serial port. In CW it randomly goes mad sending all sorts of 
> rubbish/garbage. It's not RF as i'm only keying the side tone, it's not the 
> interface as it works fine with Logger32, SD and N1MM, but I'm hoping there 
> is a simple line to add into the writelog.ini file to make it behave itself?
> This has actually been bugging me for a couple of years and until now I have 
> worked around this by using an old Winkey on the laptop's comport. But I've 
> now changed the 'holiday laptop' to a newer one and it doesnt have a com 
> port. I was hoping that the erratic behaviour was machine specific but its 
> still the same on the newer laptop. If I can't solve this I'll have to go 
> down the separate USB serial port route as I'm really reluctant to buy 
> another winkey USB. In these times of extortionate excess baggage charges 
> every LB/1/2 KG helps and the fewer cables/interfaces I need to pack the 
> better it is.
> 
> Any advice would be appreciated.
> 
> 73 Darren G0TSM
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>