The MicroHam examples are indeed readable. However, Randy, you are correct.
Most screen shots are graphical and of no value to us blind guys.
I set up everything as directed in the MKII instructions. The CW is working
ok. Let's see what happens in a real contest rather than just a few minutes of
testing.
Thanks for all of the help and solutions.
73, Bob K3UL
-----Original Message-----
From: WriteLog <writelog-bounces@contesting.com> On Behalf Of Joe Subich, W4TV
Sent: Sunday, August 2, 2020 10:04 PM
To: Writelog <Writelog@contesting.com>
Subject: Re: [WriteLog] CW Jitters
On 2020-08-02 9:37 PM, Randy Thompson wrote:
> The examples all show screen shots so that is probably not much help
> for you.
The examples also include step by step (text) captions. For example (from the
"microKEYER II and WriteLog Setup" document):
> 1. Click Setup| Ports ...
> 2. Select K1EL WinKey as the CW keyer type 3. Assign CW to the WinKey
> port you used in Router's
> Ports tab
As far as I know, both WriteLog and microHAM USB Device Router use standard
screen libraries that are compatible with screen readers.
73,
... Joe, W4TV
On 2020-08-02 9:37 PM, Randy Thompson wrote:
> The examples all show screen shots so that is probably not much help for you.
>
> Make sure the MicroHam software specifies a port for WinKey.
>
> In Writelog, go to ports and set CW keyer type to K1EL Winkey. Leave SO2R
> Control set to none.
>
> Set the radio button for CW to the com port that you specified in the
> MicroHam software.
>
> That should get you to the point that CW messages are keying things.
>
> You say it works for N1MM+ so have to figure it is something the WriteLog
> setup.
>
> Randy K5ZD
>
> -----Original Message-----
> From: WriteLog <writelog-bounces@contesting.com> On Behalf Of
> rgarrett5@comcast.net
> Sent: Sunday, August 2, 2020 6:37 PM
> To: 'Robert' <woodr90@gmail.com>
> Cc: 'WriteLog Reflector' <writelog@contesting.com>
> Subject: Re: [WriteLog] CW Jitters
>
> Hello Robert et al,
>
>
>
> So under “CW” in the configuration section, I have 8 choices. The only
> MicroHam setting is for MKR which is used with SO2R. I’m a visually impaired
> guy so if there is another place on the screen where Microham MKII is listed,
> please tell me. I certainly am not able to read it.
>
>
>
> The only other setting for CW is the five choices I assume for LPT and
> com ports. Any input appreciated. 73, Bob K3UL
>
>
>
> From: Robert <woodr90@gmail.com>
> Sent: Sunday, August 2, 2020 4:43 PM
> To: rgarrett5@comcast.net
> Subject: RE: [WriteLog] CW Jitters
>
>
>
> FWIW
>
>
>
> I’m hooking up winkey2 this month
>
>
>
> have used the PC generated CW in past – normally it works great but
> think RF got computer few times on that transistor interface
>
> and it would jitter & quit. then reboot…
>
>
>
>
>
> check the writelog settings, if you’re got Microham 2 set in CW
> window, then it’s a mystery to me
>
> My only experience with Microham was at Carl’s rental, the P40YL side had
> MicroHam, Most – including me, unhooked it and used USB to RS232 or whatever
> instead then hooked back up as was.
>
>
>
> 73 W5AJ
>
>
>
> Robert
>
> Midland, Texas
>
>
>
> From: rgarrett5@comcast.net <mailto:rgarrett5@comcast.net>
> [mailto:rgarrett5@comcast.net]
> Sent: Sunday, August 02, 2020 1:24 PM
> To: 'Robert' <woodr90@gmail.com <mailto:woodr90@gmail.com> >
> Subject: RE: [WriteLog] CW Jitters
>
>
>
> Hello Robert,
>
>
>
> MicroHam MKII.
>
>
>
> I just want to be sure I don’t have some incorrect setting where I believe
> I’m using the WINKEYER in the MicroHam MKII when I’m not and actually using
> PC generated CW..
>
>
>
> From: Robert <woodr90@gmail.com <mailto:woodr90@gmail.com> >
> Sent: Sunday, August 2, 2020 2:04 PM
> To: Bob Garrett <rgarrett5@comcast.net <mailto:rgarrett5@comcast.net>
> >
> Subject: Re: [WriteLog] CW Jitters
>
>
>
> How are you interfacing from writelog/computer to Rig on CW?
>
>
>
> PC generate?
>
> Winkeyer?
>
> Etc?
>
>
>
> W5AJ
>
>
>
> On Sun, Aug 2, 2020, 7:10 AM <rgarrett5@comcast.net
> <mailto:rgarrett5@comcast.net> > wrote:
>
> Greetings,
>
> I've had an ongoing problem using WriteLog with CW breaking up or
> having some delays, speeding up or slowing down, mostly speeding up in
> the middle of a message. Any thoughts as to why this behavior? 73,
> Bob K3UL
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|