Frank,
Thanks for the reply. The converter idea would be a good one if only Yaesu
made the FT-1000MP's receive I.F. (any I.F. for that matter) available on
the rear panel. Kenwood has an I.F. jack on their late-generation
transceivers, and earlier Yaesu transceivers also made it available. It's a
damn shame that one must modify his multi-kilobuck Yaesu radio to make it
work with a Yaesu station monitor. I don't get it.
If it wasn't for the fact that the radio would loose it's market value upon
making the mod, I would do it. Unfortunately, nobody wants to pay fair
market value for a modified after-market radio, even if the mod is done
correctly.
-Paul, W9AC
-----Original Message-----
From: frank ayers jr <LOMAX1@prodigy.net>
To: yaesu@contesting.com <yaesu@contesting.com>
To: <yaesu@contesting.com>
Date: Saturday, October 17, 1998 10:42 AM
Subject: Re: [Yaesu] FT-1000MP & YO-100
>
>Paul, W9AC wrote -
>>1) The FT-1000MP does not make the receive I.F. available on the rear
>panel.
>>Why? Wasn't this a feature on their earlier transceivers?
>
>My FT101ZD has an IF out.
>
>>If the FT-1000MP can be made to work with the Yaesu YO-series scopes, it
>>appears A LOT of modification is necessary. Comments please. Thanks!
>
>Perhaps a simple converter idea would work. There are simple converters for
>144 to 28 MHz, why not one for 9 to .455?
>
>Frank
>W2FCA
>
>
>
>--
>FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
>Submissions: yaesu@contesting.com
>Administrative requests: yaesu-REQUEST@contesting.com
>Problems: owner-yaesu@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|