Yaesu
[Top] [All Lists]

[Yaesu] FT-1000MP & YO-100

To: <yaesu@contesting.com>
Subject: [Yaesu] FT-1000MP & YO-100
From: paulc@mediaone.net (Paul Christensen)
Date: Sat, 17 Oct 1998 14:18:31 -0400
Frank,

Yes, I may just take it out to an unused RCA connector on the FT-1000MP rear
panel.  In looking at the changes required, all Yaesu needed to include was:

1) RCA connector
1) 10 pF disk coupling capacitor
12" of RG-174 coax

Conservatively, this brings the total additional expense of the rig to less
than one U.S. dollar, even on a single unit price basis!   In actual
production, I suspect the additional cost to Yaesu would have been a
fraction of this.  I keep asking the question.....why?

Thanks es 73,

-Paul, W9AC
-----Original Message-----
From: frank ayers jr <LOMAX1@prodigy.net>
To: Paul Christensen <paulc@mediaone.net>; yaesu@contesting.com
<yaesu@contesting.com>
To: <yaesu@contesting.com>
Date: Saturday, October 17, 1998 2:02 PM
Subject: Re: [Yaesu] FT-1000MP & YO-100


>
>>If it wasn't for the fact that the radio would loose it's market value
>upon
>>making the mod, I would do it.  Unfortunately, nobody wants to pay fair
>>market value for a modified after-market radio, even if the mod is done
>>correctly.
>
>How about bringing it out through some other unused port. If you have a
>phono plug for "audio in" that you never use, put it there. Just change it
>if you ever sell the rig.
>
>
>Frank
>W2FCA
>
>
>--
>FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
>Submissions:              yaesu@contesting.com
>Administrative requests:  yaesu-REQUEST@contesting.com
>Problems:                 owner-yaesu@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>