[Top] [All Lists]

Re: [Yaesu] [1000mp] FT1000MP Menu settings for notch filters - Hereis H

To: <1000mp@mailman.qth.net>
Subject: Re: [Yaesu] [1000mp] FT1000MP Menu settings for notch filters - Hereis How 2-9
From: "WD8ARZ" <wd8arz@ix.netcom.com>
Date: Wed, 5 Oct 2005 11:40:14 -0500
List-post: <mailto:yaesu@contesting.com>
To use both the Auto-DSP and the Manual Notch on the MP like I do John (and 
Scott), go into Menu 2-9 notch option. There are three options there: 1) 
iF-notch (which is the manual notch) 2) Auto-dSP (which is of course the 
Auto DSP Notch) and 3) SELEct (which is for both the manual and dsp 
notches). I use both at the same time with out any problems. When not 
wanting the manual IF notch function, just crank the IF Notch know all the 
way to one side (or change the menu 2-9 setting of course).

Due to the different rom levels in MP's, there may be some earlier versions 
that didnt have this, but I dont know that for a fact. Maybe others can help 
out with this too.

.... one of the many benefits of the MP ..... HI HI

73 from Bill - WD8ARZ

----- Original Message ----- 
From: "John Geiger (NE0P)" <ne0p@lcisp.com>
To: <1000mp@mailman.qth.net>; <yaesu@mailman.qth.net>; 
Sent: Tuesday, October 04, 2005 1:50 PM
Subject: [1000mp] FT1000MP Menu settings for notch filters

I am a little confused about getting the FT1000MP set up for the different 
notch filters. I understand the IF-Notch menu setting, but different 
writings about the radio seem to indicate that you can have both the manual 
IF notch and the autonotch on at the same time.  Does the Auto-DSP menu 
setting do this?  I tried this yesterday, turned on the EDSP, but don't 
think I was hearing the autonotch working.  I did not have the notch button 
on at that time.  So what menu setting do I need to use and what buttons do 
I push to get both the IF manual notch and the DSP autonotch working at the 
same time on SSB?

73s John NE0P

Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>