K0BWQ wrote:
> -----Original Message-----
> From: yaesu-bounces@contesting.com
> [mailto:yaesu-bounces@contesting.com] On Behalf Of Willard Morton
> Sent: Thursday, October 13, 2005 9:40 PM
> To: yaesu@contesting.com
> Subject: Re: [Yaesu] Yaesu Digest, Vol 34, Issue 11
>
>
> How do I send in a topic for discussion?
>
> I have installed the ATAS 120 in my attic using counterpoise
> wires. I would like to know if anyone has advice on how to
> improve the set up.
>
> Willard Morton K0BWQ
>
The ATAS is acting like a non ground mounted antenna. In that case, the
counterpoises need to be 1/4wl for each band you want to use for decent
performance. This is probably not feasible in the attic. I guess you just
need to do the best you can, making the counterpoises as close to 1/4 wl as
possible. The feedline ground should go to the counterpoise system. Do not
ground the counterpoise to station ground or a ground rod. You also might
want to use a feedline choke to make sure the feedline is not acting as part
of the antenna. It should be placed just outside the counterpoises.
73 John W8JJW
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|