I'm doing a search for High Voltage Capacitors to keep a twenty year old broadcast transmitter on the air for a college radio station. I'm looking for 10mfd @ 1,500vdc and 10mfd @ 10,000vdc ( or anyt
Thanks Paul, I will give them a call. Anyone with used capacitors can email me off-list with prices. Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com ht
Thinking out loud..... A 15KV @ 10 mf in a Broadcast FM transmitter many years ago shorted........... Nothing to lose, so I disconnected the capacitor ( no choke ) and made rated power with just the
Three of them locally running 24/7 for over 40 years. Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amp
http://www.youtube.com/watch?v=8ziYqjMQGEQ Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
It's good for both !!! Visualy confirm the placement, and then it makes for a great way to get solder into the joint. I've been doing "N" s like this on commercial TV and FM coaxes running 1KW+ for o
We were poor and had to use a single edge razor blade to lightly score the braid-solder before breaking it off. Don W4DNR _______________________________________________ Amps mailing list Amps@contes
LOL !!! Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
Bands dead today ??? Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
I subscribe for Carl's tart but yet sage advice. :-D Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
It's all your fault Carl............ ( whatever it was ) Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/a
4-400s will fit in a SB-220 but they are too tall. So does this mean the 3-400 is shorter than the 3-500 , and the 3-500 is shorter than a 4-400 ? Don W4DNR __________________________________________
"Attila the Hun 10,000" ..... conquers whole continents. Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/a
Kind of like babying fuses. Do you run them at 100% or at 10% ? Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/lis
My understanding as well. Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
Are you saying that the coil(s) are larger to go from 2600 ohms down to 200-500 is larger than going from 2600 down to 50 ? Don W4DNR _______________________________________________ Amps mailing list
I had a cat once that I called, "Sparky ". Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
Then why does the new ACOM 1500 use the 4CX1000A ? Don W4DNR _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
The ALC in the Collins 30S1 is derived from a transformer between the bias supply and the tube. To get ALC, Grid current must flow ..... even if slightly. ZERO grid current = Zero ALC. Possibly a bet
The Chinese are making Hi-Po parts for Speed Shops now. Cams and roller lifters, and dual plane intakes. Looks like the Chinese are trying to put every part of American manufacturing out of business.