Hello group, I have been using KN for a while now but am new to this list. I have a Kn205 in a metal box running as a back haul and AP using prism 100 and 200mw cards. When I upgraded to 444-02 my sy
Will the 11g turbo ap support the 11b turbo remotes? Dan, One of our product lines is based on TurboCell- so I thought I should keep in touch! My understanding is that Karlnet will be releasing the K
That seems a bit short sited? Is this planned or is there a physical reason for this. I ask because I would not deploy this in an area I already had TurboCell unless I could support my existing base
Well that must be only limited to KN because I have an Atheros AP talking to Intersil in 11g mode. What I have from an email with a Karlnet engineer is the following: What that means is that in a kbr
Hmm, that is debatable. And don't get me started. I would agree with Dan, This is something that you have to plan. I do think the Knet systems offers more than Trango or Motospecifically SPEED! Kevin
John, Have you thought about supporting the KN PC Driver for Linux so you can setup a Satellite station off a KN TC network? You can do that with a MikroTik RouterOS AP. http://www.mikrotik.com/docs2
You need to talk to your KN reseller but general yes. Is any "credit" available/applied toward a license upgrade from a KN 4.x SAT SOHO to KN BASE? I've got one KN-100 laying around that's licensed S
John, This may be a stupid question, but with this new polling protocol, will the client need to also have this software or will a standard .11x system talk to your ap running Nstreme? the same. have
Opps, sorry I read below your answer already. Ignore. the same. have KN link. this new Yes, this is why we started making this protocol -- to get the highest speed out of a long distance links and ov
What radio cards are you running? The problem is the retrans I bet. I have had this problem also. The KN50's need firmware upgrades. Don't upgrade your kn205 to -02 yet. If you can try going to -00.
If you have kn50's on your network, I bet you are having the same retrans problem. Same problem here but with an AP1000 with indoor amp running Version 4.43 karlnet I restart the amp traffic comes ba
Yes, it is a software issue. Notice no one from KN jumped into this thread. It seems to be a software problem. We have this problem after we upgrade one Orinoco-ROR (original) to Karlnet 4.43 and 4.4
Right on, just saw it. Woo wooo. To Karlnet's defence, they have contacted all the people that have contributed off-list and asked them to fill in a form with specific details about what versions / r
On my kn205 board, I am running 444-00 and it seems to have stabilized. One thing you can try is to look at all of the high retrans on your network and lower their link speed to 1mbs if that will sup
Its not power. Yup, we are having the same type issues. Have replaced the KN-205 and KN-105 boards at two locations. Tried three different 4.44 releases and even went back to 4.43 on one. None of the
On my tower I have 2 and it was just terrible there for a while. Hasn't seemed to make a difference for me either, but most are between 20 and 45 clients each. Rick Harnish President OnlyInternet Bro
I don't think so, the issue with most OFDM in the market todate is the "turbo mode" options that are none standard and if a Wifi competator decides to deploy a 11g system in your area with turbo then
I looked and don't see anything. ?????????????? All, v4.45 is still on schedule to release. Please check http://www.karlnet.com/ Monday, May 17, 2004 for release announcement and notes. Thanks Reg Ma
So based on everyone's stellar experiences with the KN 4.45 kernel, I am going to upgrade my entire network. Later, I am going to take all of my money out of the bank, put it in a big pile and roast
Well, that's good to hear. Anyone else have good things to say? --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Dan Metcalf Sent: Wednesda