DualPower 840 ATX/A4/XE (PFC) $569.00 Jeesh...go buy a used real server off ebay! If you are gonna spend $570 on a power supply...you might as well spend a extra grand on the rest of a rack-mount ser
I thought that the RG-1000's with TC SOHO flash supported PPPoE. I can't find it in the menu anywhere. Also, if it does support PPPoE, will it support ms-chapV2 encrypted authentication? thanks, bob
oops... sent it too fast.. https://gullfoss2.fcc.gov/cgi-bin/ws.exe/prod/oet/forms/reports/Search_Form. hts?mode=Edit&form=Exhibits&application_id=251127&fcc_id=NI3-2511CD-PLUS2
11Mb radio speed does not equal 11Mb data speed. On a typical 802.11b network you will get 4.5Mb data speed. It appears with Karlnet, under a little load...you'll actually get better performance than
wow...at 1000 miles I think you need a modem at each tower with the APC equipment on the ground. -bob -- Original Message -- From: dsaab@saabenterprises.com href= David Saab To: karlnet@WISPNotes.com
So, you are saying that A COR 1100 can only talk to 16 RG-1000 w/ TC? What are the numbers of different clients that you can connect to the different hardwares. I realize that is a complicated questi
So.. TC Client = Karlnet Satellite...right? ROR can talk to 16 TC Clients COR can talk to 32 TC Clients TC ISP base 64 RG's? TC isp base is what goes on an AP-1000 right? -- Original Message -- From:
The Border Router must know where all your internal networks are or what the next hop to them is. Each additional router must know where the other networks are at, or know somebody (another router) t
You have AP1 and AP2 How many cards are in each and what are the addresses. AP1 wlan1: AP1 wlan2: AP1 eth: AP2 wlan1: AP2 wlan2: AP2 eth: ? It sounds like you have one card in AP1 at your NOC on the
The Karlnet CPE from CWLab and others is an RG-1000 w/ Karlnet already loaded, in a NEMA box modified to accept POE. Add a pigtail to your antenna or get an antenna with a sufficiently sized pigtail