Karlnet
[Top] [All Lists]

Re: [Karlnet] More routing questions

To: <karlnet@wispnotes.com>
Subject: Re: [Karlnet] More routing questions
From: "Bob Hrbek" <bhrbek@jagwireless.com>
Reply-to: karlnet@WISPNotes.com
Date: Fri, 24 May 2002 09:56:31 -0500
List-post: <mailto:karlnet@WISPNotes.com>
works in windows...It should extract to your c:\program files\3cipcacl dir.

-bob
----- Original Message -----
From: "Dan Metcalf" <danm@suncorstainless.com>
To: <karlnet@WISPNotes.com>
Sent: Friday, May 24, 2002 9:24 AM
Subject: RE: [Karlnet] More routing questions


> Make sure you have a subnet calculator
>
> Dan Metcalf
> Wireless Broadband Systems
> dan.metcalf@wbsysnet.com
> 781-658-2075
> www.wirelessbroadbandsystems.com
>
> -----Original Message-----
> From: Norm Young [mailto:npyoung@applegatebroadband.net]
> Sent: Friday, May 24, 2002 10:24 AM
> To: karlnet@WISPNotes.com
> Subject: Re: [Karlnet] More routing questions
>
> Sounds like interesting stuff, but how to get started?  Can anyone
recommend
> a good book on routing?
>
> Thanks,
>
> Norm
>
>
>
> ----- Original Message -----
> From: "Bob Rohr" <brohr2@netzero.com>
> To: <karlnet@WISPNotes.com>
> Sent: Friday, May 24, 2002 12:24 AM
> Subject: Re: [Karlnet] More routing questions
>
>
> > Have you tried to breakdown the class c addresses into different
> > subnets?  Example:
> >
> > 10.10.10.1 subnet mask of 255.255.255.252 on one interface, this gives
> > you 2 usable hosts. then subnet the rest of the ips into the groups that
> > you want. Example: 10.10.10.4 255.255.255.192 this creates another
> > network 62 usable host which you should be able to pass thru another
> > interface without causing ip conflicts.  With every subnet you
> > essentially are creating networks inside of  the class c network that
> > you should be able to route thru different interfaces..
> >
> > Bill Fisher wrote:
> >
> > >
> > >If I have an entire class-c passed to a router, can I not assign the
> router
> > >an IP address of say 10.10.10.1 / 30 and then add an indirect route of
> > >10.10.10.32 / 128 through another interface?
> > >
> > >I seem to only be able to break the Class-C in two chucks.
> > >
> > >bill
> > >
> > >_______________________________________________
> > >Karlnet mailing list
> > >Karlnet@WISPNotes.com
> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>

Attachment: 3CIPCalc.zip
Description: Zip compressed data

<Prev in Thread] Current Thread [Next in Thread>