Bob Hrbek wrote: What is Receiver Stuck Detection? Is that the RG lockup issue where low signal or low use causes the RG to drop off? This is a condition where the satellite will ceace to participate
Bob Hrbek wrote: That is exactly what we have been seeing. Thanks for the clarification. WHERE IS THE CHANNEL AUTOFOLLOW feature?? I thought that was "in the next release". Correct me if I am wrong,
Bob Hrbek wrote: "Frequency Guessing" would be a welcomed option. Not sure it would be worth an upgrade but with the interference issues we have encountered lately, it would have saved me from reconf
Bob Hrbek wrote: no, I was not aware of any scripting abilities short of writing the SNMP attribs of the RG. Do you have a working example? ...Care to share? Hello, Here is is. Rename it to script.vb
Bob Hrbek wrote: How much longer till the NEW Ubicom hardware is out?? Multiple AP's All cpe's are RG-1000's w/ 4.x SR-4100 @ 5.5Mbps and decent signal (at least 16db SNR at the worst) 45 (no wep) 18
Wisp Notes wrote: Just wanted to pop in here and say thanks to Tony Morella. We talked with him last week about some things with Karlnet we needed to fix. We bought the Zcomax cards and installed the
Eric Meth wrote: You can set the upload rate limit on the transmitter. The download rate is set by specifing the rate on the ethernet interface. Hello, Has anyone tried this recently? I am trying to
Eric Meth wrote: Chris. In version 3.88 it worked properly, you could set the rates individually. Since then, setting the MaxTxRate sets both. Asymmetrical does not work. Karlnet suggests setting the
Norm Young wrote: I've never been able to get that to work. In practice, what I've seen is that in setting the speed on the two interfaces for say, an asymmetrical connection like 256/128kbps, result
Hello, I have already reported this issue over a year ago. If you put the base station to 5.5Mb in the sensitivity setting, you no longer have the problem, at the cost of about 80K/sec of throughput,
Hello, I have been chasing this problem since 3.75 if my memory serves me correctly. The only workaround we have found is to set the base to 5.5Mbit in the sensitivity setting (Medium), and if a sate
Hello, I have found that using 1Mbit affects the overall throughput of the base station; I am not sure why. In any case, we set our satellites to 5.5 or 2Mbit miminum and are quite happy at those set
office wrote: Hi, I have two AP1000 running V4.02. The ETH interfaces are directly connected with an Ethernet cord (no HUB/Switch). On one of the AP's the "carrier sense error" are constantly increas
helio@compuland.com.br wrote: Hi: Unfortunately turning off watchdog reboot timer on the base station do not solve the lockup issue. I've done that a week ago. Today, 10 minutes ago, one base locked
Hello to all, I have been having a strange problem for quite a while. I have spoken to Karlnet about this and they told me it was a rare occurrence and _maybe_ one other customer was seeing this but
Kevin Knuth wrote: Chris, Who have you been dealing with in our office? Hello, I began talking about this to a pleasant yet overworked Doug Harman in June 2001. I have given up talking to Karlnet sin
Dan Metcalf wrote: I now see this after upgrading one of our wavepoint II (bnc connector) to v4.31, on its "backhaul" link Hello, We have been having this problem since 3.75 and probably before. Howe
Hello, I believe it would be a good idea. This situation is quite difficult to reproduce and only causes the mentioned problem for a short while. Once it "times-out" or whatever, all satellites resu
Hello, As I said, this problem only occurs for a few minutes, where a single satellite is hogging all resources. No other satellites get polled. I don't believe that this "fix" would necessarily have