Amen to that. I would really love to see a karlnet compatible radio that's boast more than a 5 mbs transfer capability. I have looked at alternatives like Mikrotick and such but really want to keep m
I have considered it and am really going to try and keep all Karlnet. I know the 802 will be outgrown faster than I would like. I just need to get more bandwidth to my backhauls. that's alternatives
Charles this is a link to an alvarion poe device, did not know such a monster exsisted. Does this work with the 900 cpe? How much are they? Thanks, John degree port of we ____________________________
Any way to find out? Would on of your alvarion contact know for sure? Sorry just like a little more reassurance :) John fan truth, I'm problems many for power report but due sinks) meters do ________
Long second there Charles! :) What did you find out? Well send me your current pricing and our next purchase we can compare. Thanks, John Sorry adjustable and 12V1A units ___________________________
Can you send me some info on this offlist please. Thanks, John _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/k
I think basically what he meant and I have felt the same as well. That the pricing on the software does not reflect the hardware its being installed on. Why pay the same software costs to run half th
PROBLEM: We are now only getting 400-800K on a 3MB connection out!? Our main tower AP1000 was being fed from our uplink provider to our tower via a T1 loop from there data center to our tower. Our wi
Hello, Confident my problem was in the routes I decided to play with the routes. I gave the radio interfaces private routes 10.10.10.1 and routed the real network over that via indirect routes. This
I understand that but I failed to assign the radio ports the any ips and now I need to get into it remotely via a wireless link not the ethernet port that is why i was wondering how or if it is poss
The relay kn-200 which is the one in the middle it is in routing & bridging mode. It does have ips assigned to it. It actually has 12.96.250.38 via a direct route to interface 1 and as the prefered
the No, Its not that I do not know HOW to get to the Ethernet port of the KN-200 it is I do not have PHYSICAL access to any of it at this time. Other wise I would have just plugged into it via a cro
if They are in bridge mode. Everything is in bridge mode, only exception is the kn-200 which is in router & bridge mode. Thats why I was saying I SHOULD be able to see it from my home link. Thanks,
No this did not work. I plugged right into the RG's Ethernet port via a crossover cable, this is the RG connected to one of the radios in the kn-200. Yes it is in bridge mode and it does not pass the
Yes they are all in the same subnet. John the routed _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet
No, it does not show up in the configurator under list of scanned devices. It does however show in the ip arp table of the rg1000's connected to its radio interfaces that are in bridging mode. I can
Here is a visual, this should make things more clear :) http://www.tcpbbs.net/layout.html John [mailto:karlnet-bounces@WISPNotes.com] the ideas? and is SHOULD ________________________________________
We are powering it via poe the run is only about 20'. from a tank house on top of a 15 story building. The unit was working just fine radios and all we are not even using the Ethernet on it, the only
It is kind of hidden away. You have to look in access control list then mac radius and in the lower right hand corner you will see a button called WARP settings. John ________________________________
Does the SMC cards have external connectors on them? John to find a good source for the 100mw as well _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http:/