I'm sure this will be supported one day, but I don't think it is yet. Several months ago Karlnet had a bin file that was going into beta 'in a couple of weeks' that would have supported this - things
I was just wondering - where is the 1 user limitation on the RG+ SOHO licenses? From my understanding it is on the ethernet port i.e. only 1 MAC can be bridged through the ethernet port. So if the RG
Hi Norm, I suspect that if you put some data through the connection i.e. do a download then the ping times will come down. I've noticed this too, but concluded it was normal and not a problem. Just n
Hi Kevin, Dare I ask if there will be any way to upgrade the low cost CPE's with this version? Last I heard Karlnet were 'working on it'. If not, will the upgrade to the AP be enough to 'fix it' with
Yes, I'm seeing this too but only on a few clients. At least only a few clients have reported the problem. The outages are always brief and the signal strengths are good. I assume this is the same p
Hi All, Thanks for the pointers, I don't think it is traffic related but I will look into this more closely. I'm a little concerned that I'm also seeing this on at least one low cost CPE and (as far
Hi All, I have some low cost CPEs here from CWLabs and want to get one configured ASAP for a trial today, however I have not been able to guess the default username/password for the web interface - d
Hi Wes, We always get the contractor to call the office and we do the link test for them. The contractor just has to get a green light on the wireless LED on the CPE first, then they know it has regi
Hi Dan, I think there will be support for cards with the Atheros chipset sometime soon - I seem to recall it was a week or two away about 2 months ago! :-) In the meatime I gave up waiting and tried
Hi Kevin, Any chance you can persuade someone to put all these docs on your website (or even the license-it website if they need to be password protected)? I just assumed there was no documentation a
Hi Kevin, I don't really see why - isn't an RG hacked by the time you have ripped off the cover, added an antenna it is not designed or certified for and then overwritting the firmware/software? I se
I think there is a temperature sensor on the RG+ units - if it exists what is the easiest way to read it? I can't find any readout in the Karlnet Configurator, but it might be that I just can't see i
Can anyone clarify if these low cost CPEs can be upgraded when new bin files come out? I know Karlnet needs to flash the first bin file, but surely they don't expect us to go and retrieve them from o
I think the FlashROM supports a max of 4 interfaces and at least one has to be ethernet - so you could use 3 radios + 1 ethernet. However, check with Karlnet as I am not certain. We use Karlnet for P
Does anyone know if there is a voltage regulator on the RG-1000/RG-1100? If so, what range of voltages can it cope with? I know the RG+ board can accept a wide range of voltages (from 9v - 48v I thin
Hi Charles, The first site I'll try this on has an RG+ and an RG. It has about 50m of Cat 5 which I currently run POE on. I could run the RG with POE and the RG+ with a seperate POE run, but I was al
On the Microtik home page they are advertising a 2.4/5Ghz mini-pci card with pigtail. This uses the Atheros chipset. Is this the chipset Karlnet announced support for last year? I seem to remember th
-- "Wallace L. Walcher" <karlnetlist@walcher.net> wrote: My mistake, got my .com and .nets mixed up. :-) It's htp://leaf.sourceforge.net/, look under 'releases / branches'. The full URL is: http://le
Thanks I'll try this. This is one of the questions Karlnet counldn't answer or at least I'm still waiting for the 'Linux expert' to reply (1 month later and 2 reminders)!! In the end I swapped out th
Also, don't forget it will only work with certain very specific kernel versions. Not sure exactly which ones, but I can dig out the kernel version we run it on if this helps. Cheers Paul ____________