Do you mean 58 GHz, or 5.8 GHz? At 02:22 AM 2/13/03 +0100, you wrote: Whilst on this topic - does anyone know a good vendor of 58Ghz products? Eden Roger Boggs
Is the FlashRom module still available? Couldn't find any references to it on the revamped KarlNet web site. Was looking today at the Via EPIA motherboards trying to find what LAN chipset/emulation t
Seems to me that someone once said that this was a known bug in the 4.0x firmware, and that it went away in later revisions. Charles, Tony, Kevin? Anybody remember something about this? At 01:08 PM 2
http://www.connectix.com/products/vpc6m.html At 09:56 PM 1/9/03 +1300, you wrote: I am backup admin for our network of TurboCell AP's & CPE's. I use an Apple PowerBook, Mac OS X for my day to day wor
Sounds like that key that you have doesn't describe the configuration that you're installing/setting up. You need to get hold of someone that makes these keys and have them doublecheck everything for
If you're already a KarlNet weenie (and you must be since you're on this list), maybe you could buy or build a KarlNet FlashRom RadioLan box. We used to get about 8.2Mbps out of that configuration. M
Sounds like you might be on the right track. Power supply doesn't have enough current to the unit? Turn off the watchdog reset, too. Someone was having trouble with that recently weren't they? At 09:
These are very good signal and noise figures. If you are getting retransmission rates of more than 3 percent (transmits/retransmits x 100) and you see no indications of interference (where the noise
Take that satellite offline and the world is okay again? Go find out what that person is doing, and make them stop. Are they running a server on their end? I've not been following this thread too clo
Correct. At 08:12 AM 12/19/02 -0500, you wrote: Technically yes you can. You could route your IP and bridge your IPX, NetBEUI, DecNET, etc. Don't belive you can bridge and route IP at the same time t
Here's the definition of Preferred IP Address that we had in the context sensitive help file for our Karlnet Configurator when I was at C-Spec... "From time to time, the Bridge/IP Router will transmi
Can we cool down a little with the back and forth sniping everyone? It's not getting anyone anywhere, and there's not much real technical info exchange going on lately. Roger Boggs
No biggie, Mark. I've got some gripes myself, but right now it seems like the whole thing is starting "snowball" into something a little nastier than what it started out as. I wanted to chime in a co
Don't know if this will help anyone, but it's helped me a few times. Sort of like an online manual for TurboCell configuration. Might help explain a few less than obvious terms. Seems to me that its
How about getting it from KarlNet? http://www.karlnet.com/download/index.html It's listed on their site as 4.00.13. Is that the one you're after? At 04:01 PM 11/4/02 -0600, you wrote: download it fro
In "clean air", you should expect about 5.5Mbps maximum out of this configuration As Charles said, use a flashrom module on a 300MHz or better machine and you should expect to see about 6.7Mbps or be
If you did like I did the first couple of times (using cwlabS), try the singular version of the same thing. http://www.cwlab.com/ Worked OK at 4:15pm EST. At 01:53 PM 11/13/02 -0700, you wrote: Anybo
He's using an amplifier, though. That's probably going to be the noise reading on any channel he chooses. Without the amp, it'd probably end up being down around 90 or so. At 01:20 AM 11/14/02 -0600,
Someone here recently said that they (so far) had solved their lockup/reboot problems by turning the watchdog timer completely off. Who was that? Problem still solved? At 09:43 AM 11/25/02 -0500, you