We can make them for you min qty is 100. Sincerely, Tony Morella Demarc Technology Group, A Wireless Solution Provider Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 http://www.demarctech.
Bob If you are looking for a FCC certified solutions pleas take a look at our radios and antennas: http://www.demarctech.com/products/reliawave-rwz/reliawave-rwz-100mw-pri sm2-5-pcmcia-card.html http
We never had any AP that use the Senao radios. Sincerely, Tony Morella Demarc Technology Group, A Wireless Solution Provider Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 http://www.demar
Norm SF-4300 will only work with 2 interfaces. Sincerely, Tony Morella Demarc Technology Group, A Wireless Solution Provider Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 http://www.demar
Lopes This is exactly what TurboCell will accomplish for you, it will fix the timing issue. Please feel free to contact me off list for more info, more info can be found on our website. Sincerely, To
Bruno No they do not, we have outdoor encloses kits designed for them: http://www.demarctech.com/products/reliawave-ode/reliawave-rw-ode-8585-k it.html Sincerely, Tony Morella Demarc Technology Group
Steve The PCI/PCMCIA cards we sell are the only ones that we have tested and know to work, not to say other won't. Also I am hoping there will be better WEP support coming soon, I know Karlnet is wor
I was referring to the question about the other PCI adapter. Sincerely, Tony Morella Demarc Technology Group, A Wireless Solution Provider Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 ht
FYI we have 21 RG-1100 left on the shelves still in boxes plus 6 of just the SBC no radios. Looking for an offer for the full lot. Also have two AP-1000 CPE units with now power supplies. Make offers
Norm / List Version 1.5.6 can be download here, links at bottom of page: http://www.demarctech.com/products/reliawave-rwz/reliawave-rwz-200mw-pri sm2-5-pcmcia-card.html Sincerely, Tony Morella Demarc
Mark We have custom enclosures kits designed for use with the Karlnet boards basically is everything you need besides the boards. Don?t let the single qty sample price get in the way of emailing me o
Nate The average injector mold cost about $10k to $30k to make so they only way to makes sent is if you do a very large run even $10k its still a $1 before the cost of the material and labor to make
Brett the wet11 but for hardware using the Ubicom chipset like the wet11 has, but just because they use the same chips does not mean the code will run on the hardware. This is because of how the Ubic
Caleb Have you done side by side testing with both cards? Look at the modulated RF signal on an SA? Watch the signal output on the cards over time? Test for RX levels changes, over time? Look at the
Also another point I would like to make, look at the FCC cert for the Zcom card (Demarc) which is at .234 watts (234mW): https://gullfoss2.fcc.gov/cgi-bin/ws.exe/prod/oet/forms/misc/Grant_Form. hts?a
FYI "should" have the boards next week. Also FYI the new low cost code will be bridging only and have limited feature support. Sincerely, Tony Morella Demarc Technology Group, A Wireless Solution Pro
Bob Only the Orinoco Card is supported under Linux. Sincerely, Tony Morella Demarc Technology Group, A Wireless Solution Provider Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 http://www.
Yes it still is have them in stock if needed. Also the 8139 is supported but using the Flashrom you need a nic with EPROM support. Sincerely, Tony Morella Demarc Technology Group, A Wireless Solution
This is easily done with a flashrom unit (which we have in stock). I personally like the Asus or Abit MB for this type of install. The CF setup is not really supported for this type of setup, not say