Before: -- RG = $115.00 After -- New MB = $150 + $50 (radio) = $200 Add LMR, connectors, arrestor, POE, antenna, mount, enclosure, and CAT-5. I thought this new stuff was going to be priced around $3
That is what I recall from WISPCON II as well. But I guess we might have to wait for another year till that happens!!! Nate --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bo
Yup, way too expensive for my customers. Looking at alternatives.... So, now, where I was having to charge $400 per install, I'll need to charge closer to $500. That's just too much for most of my ma
I got to tell ya. Our current CPE solution that we use is running right at $285. That is for everything. But also using RG-1100's and SR-4000 license. With Outdoor Rated Gel Filled CAT5 cable. Nate -
I guess that Waverider CPE isn't so expensive after all!!! On a serious note are these prices that are being through around LIST prices? Is there going to be a discount on these boards like I usually
Sweet! We are also using RG1100s and the SR-4000. You must be using a fairly inexpensive antenna? Almost all of our installs are 24dB parabolic grids ($65). Mount at $15. Pigtails at $12.50. Enclosur
How can you get by charging just $400 per install? My RG1100 KN based CPE costs me about $80 with brackets, antenna, etc. Do you not charge anything for the labor on the install. My install fee is $4
That price was for the REALLY LOW COST solution. That has NOT been released yet!! --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Bill Fish
The isssue here is this: The new WPRG board we are releasing is intended to be a ONE RADIO BASE STATION. We also have a two radio version. We have repeatedly reported on this list that we will have a
Kevin, I await the WET11-type driver with 'bated breath. As a matter of fact, if you want some beta testing, I'd like to give it a try. I can even be discrete. (It's difficult though. Norm -- Origina
The biggest difference is what you are paying for your RGs. We bought 300 RG-1100s and got them for $115, $117 each shipped. And we can also get away using the $30-35 Maxrad WISPerformance antenna's
I charge an INSTALL that is lower than my actual hardware costs. I eat the labor of the install but retain ownership of the CPE. If my customer goes to another isp/wisp....I get my gear back. I try t
does the SR-4000 license have an 802.11b mode, i.e.: can it be used with a non karlnet access-point? --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]On
no -- you need SE-4500 however, some KarlNet vendors will let you swap out SECs for SRs when the time is right to upgrade your network -Charles --Original Message-- From: karlnet-bounces@WISPNotes.co
Nate, I like the performance of KN...it's pretty much flawless in that respect. The only issue is price, in that I pass along the CPE/install costs upfront to my customers. Norm -- Original Message -