Version 1.37 of my Pegasus software and Version 1.05 of my RX-320 software are now available. Go to qsl.net/tentec Click "Pegasus" For pegasus software, click "1.37" For RX-320 software click "RX-320
Ten Tec Omni VI with mathcing power supply and four optional filters and desk mic. Price breakdown: 1.8 khz filter (at 6.8 mhz): $50 500 hz filter (at 6.8 mhz): $50 250 hz fileter (at 9 mhz): $50 250
I have just put out version 1.38 of my Pegasus software. This version has a great fix for the poor tuning rate with the remote tuning knob. This fix in this version gives much more natural and fast t
Version 1.36 of my Pegasus software is now available. It features a way to interface with the Top Ten Devices automatic band decoder. This allows a band switch or linear amplifier to automatically be
Sorry guys, I made a typo on the Top Ten Devices web page. It is www.qth.com/topten/bdecoder.htm Carl Moreschi 919-494-2363 Franklinton, North Carolina carlmoreschi@worldnet.att.net -- FAQ on WWW: ht
John, Yes it does. You need to select the Ten-Tec file interface for log-eqf as oppposed to the N4PY file interface. Carl Moreschi N4PY Franklinton, North Carolina carlmoreschi@worldnet.att.net -- Or
I have just released version 1.35 of my Pegasus software and version 1.04 of my RX-320 software. To download the Pegasus version 1.35 go to www.qsl.net/tentec then click "Pegasus", then click "versio
This is a multi-part message in MIME format. --=_NextPart_000_0005_01BF86DE.2CE17CE0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable With the new import/exp
New versions of my software for the Pegasus and RX-320 are now available. Go to www.qsl.net/tentec Then click "Pegasus". Click "1.33" for the new pegasus software. Click "RX-320" for the new RX-320 s
I had a need to connect the speaker output to another box that also grounded one side of the speaker output. I used 2 back to back 8 to 600 ohm matching transformers on the Pegasus speaker output. In
I am coming out with a version of my Pegasus software that runs on the RX-320. As such, it will allow the frequency to be set from an external program through a file interface. I am testing this now.
Jay, Just a point of clarification on the old OMNI series. I bought an OMNI A series B new back in 1980. The OMNI D and OMNI A were identical except for digital display versus analog display. The "A"
I stand corrected. But I still say it was the OMNI series C. They dropped the "D" when they stopped making the analog version. My main point was really about people saying OMNI A versus OMNI D and wh
Version 1.31 of my Pegasus Software is now available. Version 1.00 of my RX-320 software is now available. The new version of the Pegasus software has a few new features and now includes the ability
I have tested my software with Ten-Tec's latest firmware version 1.140 and all is well. Their latest firmware is part of their new Beta release 1.63 X6. I don't see any improvement in missed pulses w
I see two problems immediately with the new TT Beta. The S meter stays at zero way too much, and the mouse cursor disappears when you move it to the tuning knob. Carl Moreschi N4PY Franklinton, North
Carl Moreschi 919-494-2363 Franklinton, North Carolina carlmoreschi@worldnet.att.net -- To: <tentec@contesting.com> -- FAQ on WWW: http://www.contesting.com/tentecfaq.htm Submissions: tentec@contesti
John, You are correct!! I made a typo and didn't catch it. The part number is MC68HC705C8CS. If you can get one of these chips, mail it to me. I'll be more than happy to write my firmware to it. Some
John, Its been several years since I wrote this firmware. Looking at my source code, it uses 448 bytes of RAM built into the chip. If the chip you are looking at only has 176 bytes of RAM, it will no
Anyone had any luck coming up with a way to either quiet the fan or replace the fan with another one. The Centaur is a nice amp but the fan is very load. Carl Moreschi N4PY Franklinton, North Carolin