I had a ton of problems with freeze ups on 2.059 while 2.057 ran fine. No one could explain it. No one else was having the problem. The rig has been at TT for almost a month after they suggested I ha
On Upper Sideband an audio note is heard when a signal is ABOVE the "effective BFO frequency" and in order to bring that note to zero beat, one must tune upward, lowering the pitch of the audio note
The ones based on the Prolific chip set seem to work the best. It can be frustrating getting the setup right. You may have to reboot your computer a few times to get it right. k4ia Craig "Buck" Frede
Orion I here. AGC slope is a new concept to me and I can't find a good explanation of what is going on. Can someone point me in the right direction? I do like the slower attack with the new AGC. I th
After playing with the new software and deciding it sounded "off" (clicking in the headphones, fuzzy CW note, too much noise), I decided to do a RAM reset = ON + VFOB LOCK. The radio did its master r
I was able to recover the radio by reloading the software. So, I would not suggest anyone try a Ram reset as that function appears to be broken. k4ia Craig "Buck" Fredericksburg, Virginia USA
No, but when I pushed the SUB RX button to put it on VFO B I got the blue screen of death - my display went blank and none of the buttons would work although I could hear the Rx. Between the blue scr
Well, I made the mistake of pushing the SUB RX VFO B button and the radio crashed - blank screen nothing works. I have Master Reset, RAM reset, downloaded the 2.059 upgrade again and reinstalled. Sti
The 2.059 blues: To recap: After pushing the SUB RX button to VFO B, everything died. That is the second crash with 2.059. The first happened when I did a Master Reset after loading 2.059 the first t
Yes, mine does the same thing. The VOX indicator does not come on when you go from SSB to CW but it is obviously still active. It also freezes the sweep when a noise activates the transmit. Good news
I downloaded 2.059 again this morning and reinstalled it in my Orion I with the ver2 hardware mod. This was the third or fourth time I have downloaded and installed 2.059 I operated a few hours witho
Well, I have spent a lot of time on the phone today with the good folks at TT and so far no one seems to know why I am having so much trouble with 2.059 crashing while 2.057 works. I really appreciat
Thanks to all - as we continue to hunt this one down. I have done the Clear RAM reset as well as the Master Reset. I have cleared User Memories and Filter Settings. I am exploring the possibility tha
_http://members.cox.net/wc4r/Orionfirmware.html_ (http://members.cox.net/wc4r/Orionfirmware.html) And if you want a real treat try 1.371. The NR is amazing. k4ia Craig "Buck" Fredericksburg, Virginia
It is the official TT email address for the software developer(s). _ditsnbits@tentec.com_ (mailto:ditsnbits@tentec.com) You may get a canned reply or not. We are assured someone reads the mail but do
I think the thread on this was that LDG supplied a tuner that TT put in the Orion. TT and LDG had falling out LDG had left over tuners LDG running out of leftovers and won't make any more k4ia Craig
I don't use Carl's excellent program but if he says he can do it, I am sure he has figured out a way. Another alternative is to use memories. Most rig's memories are a pain because it takes multiple