The problem in using a Corsair II supply is that I think it only supplies 18 amps. I may be wrong but I think the OMNI V, VI, and Paragons use the 20 amp supply. The Corsair II supply will work as a
Airpax breaker for Paragon and OMNI V and VI is Part # T11-1-20.OA-01-10A-V This is the "fast" breaker. It is the same as the 1140 which is no longer made. Make sure you get the fast and not the inst
John, on Monday call Ten Tec they have the manuals and you will need one eventually. Dan/N4VET ** See what's new at http://www.aol.com _______________________________________________ TenTec mailing l
Japanese radios fold back power with a bad SWR and Ten Tec do not. Be careful you don't blow your finals on full output key down if your SWR is high. Ten Tec's use a fuse in the power supply to contr
Mike, I think he is putting RF into a high SWR and his rigs are folding back the ALC. The Ten Tec's don't fold back they rely on a breaker that trips when the PA's draw 22 amps. He must not be using
Yes, Mike. Now we know what was going on once he explained it a little better. I had a TS 180s that at had to see a perfect, flat, SWR to put out full output. Like Ten Tecs better. Glad we were able
Seems the question has been answered. Hope we helped. Dan/N4VET ** See what's new at http://www.aol.com _______________________________________________ TenTec mailing list TenTec@contesting.com http:
Nothing beats an MFJ 259 or 259B Analyzer. I had a Palomar Tuner Tuner and did not like it. I have the MFJ 259 hooked up to a jack on an ant. switch. All I do is switch the 259 in line set the freq.
I would try to reseat the display to the board. You will find a row of pins on each side of the display board. The pins stop making good contact after a number of years. Be very careful and work each
Check your coax. Dan/N4VET **Check out AOL's list of 2007's hottest products. (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001) ______________________________________________
Seems Ten Tec learned from the Orion that "If it ain't broke don't fix it." Look at all the versions they made for the Orion and with each version more and new problems. I am glad they came to realiz
I just remembered something from two week ago. I needed information on a Ten Tec product manual. I could not seem to find the answer to my problem and Carl Moreschi (N4PY) suggested I send an email t
May not be heat related since the rig is still on when you change bands and the sound goes away. The radio is still hot right? So, next step would be to open the covers and check to see that all grou
I have been trying to get this type of information for my OMNI V for years with no luck. Ten Tec simply will not give it out. This is kind of like what the Thorens turntable company did long ago. It
They won't do it. I have told them I would pay for any information. They will not give it out. I even spoke with Jack Burchfield. I know they have the information for the technicians in the repair de
Have you tried to do a complete alignment on your rig using the owners manual. Yes, I am sure you could look at the information provided and try to come close but you will certainly know that with th
Has anyone tried to do a complete alignment on their rig using the owners manual and not a service manual. Yes, I am sure you could look at the information provided and try to come close but you will
Yes, I have a Drake TR-4Cw and that manual does give all you need to know. The Drake manual was like the Collins owners manual. Very complete. I would volunteer to put something together if I had eno
What's missing is what's missing. I know that when you send a rig to Ten Tec the technicians don't use the owners manual to do the repair and alignment why should we. And, if they have service inform
Bob, you must have a well done manual. N6KB is right. I did not buy a radio from Ten Tec to have an electronic puzzle. I will buy a Rubics cube for that. Yes, must of us could figure it out with time