Hi ???? Just sold my Corsair II line. Always enjoyed the audio quality,very easy to listen to. Bought a really nice OMNI-V ,with the 9.2 chip and ALL the filters. The audio...on a separate speaker...
Bob ?I was reading the back part of the manual I think you most likely found the problem. Ten Tec gear is new to me and it takes a while to read and understand just how they do things and way. I will
Jerry ? after reading your comments and a few others,think you hit the problem. No longer have a decent bench,so will see if I can hunt up the gear to go thru the rig. thanks dale wt4t Filter cutting
Using the external speaker from my old 920 ...sp-8? tried several and they all sound bad with this OMNI-V. thanks dale wt4t I have had very good luck using external speakers with both my omni vi and
Jerry ?the bpt seems to work as it should,varies the signal as it should ,except the signal STARTS off as the poor audio signal. I did notice the BPF and the fade controls do next to nothing for the
Steve ??? talked to a coupla of the local guys who use ten tec ,they all seem to agree with you and myself the corsair II does have a more plesant audio. They also thought the omni-V sounded better t
Jerry ???? the brain isn't functioning fully today,I guess. Iam confused about the use of the? BPF/FADE control. This control....or controls.... take a full? flat audio signal and makes? it able to c
Ken ?the rig acts the same ,makes no differance if your in USB or LSB. dale wt4t controls.... take a full? flat audio signal and makes? it able to cut the audio pass band from flat to 220 to 1700 by
Jerry ?? Ive pretty much decided the rig is going for a ride to Ten Tec. I read the manual today and just don't have? the gear to do justice to the radio. My old heath gear wouldn't be up to the task
Rob ?Decided to let Ten Tec tweak the rig . ?Just don't have the quality of test gear to do it right,old HEATH GEAR...Thanks for the info on the pots,good idea. I have one of the old banana mics also
Ken ?all the filters are in the right slots, borrowed a 2.4 and subed it in the proper slot,no change. dale wt4t Someone not interested in SSB operation could have put a 1.8 kHz filter in for the "wi
?? I talked to the guy I just bought the OMNI-V from. His story is this. He operates 99% of the time? cw on 80. He decided to go to 17 ssb one day and found the problem I have ,very distorted audio.
Jerry ?what is the pin1 issue? ? the problem is on receive audio. dale wt4t Sounds bad on receive. 73, Jerry, K0CQ _______________________________________________ TenTec mailing list TenTec@contestin
Barry ?from what I was told ,he tried to set up the bfo adj's ,but didn't have test gear up to the task. dale Before sending it to Ten-Tec, you really should find out what that local guy did to "fix"
Have a as new omni VI option 1 ,with 961 speaker/supply. cosmetics 9+/10,operational 10/10 .with optional filters. sn# 09A10434. filters are #288,285, and 218. origional boxs and factory manual. rig
Ive been following the posts on the new II and the release of v 2.0 of the software, thats all well and good and I say kudos to tentec for moving foward. BUT.... what about all of us Jupiter owners.
Rick Iam sure we all know that I mean software improvements for the Jupiter. They came 1-2-3 for a while ,fixed many of the problems and added features... then every thing stopped. I use n4py softwar
Iam looking for a Omni-5,would like to trade a beautiful kenwood ts-850sat. with std filters,sp-31 speaker,mic,power cable and manual. the rig is operational 10/10 and cosmetics are a 9+/10. Origiona
Hi to all. Let me add my 2 cents worth on this cable problem. I cut the mic cable about a foot back of the mic body ,spliced in a 4 foot section of radio shack mic cable and did a careful solder job
QUICK QUESTION, JUST BOUGHT A OMNI VI WITH THE OPTION 1 UPGRADE. Since I haven't got the rig yet and there is no where to download the manual I had a question about the filters. I gather the rig came