PROBLEM: The Paragon II display board is set with a series of "7's" in its display I replaced the rocker ON/OFF switches on both the 961 PS and the PARAGON II. I replaced the PS switch first and the
I want to thank all those who have provided some positive leads to check. To accomplish this in a regimented fashion it may take a few days but at least I have a direction to head to try to remedy th
Thanks to the suggestions I was able to resolve the problem with the display board on the PARAGON II: --FIRST. checked all board/ground continuity --SECOND: reseated/DEOXIT (again) all connectors --T
I just bought two from Ten Tec for total of about $13. One for replacement for the 961 and the other spare for either the PS or Paragon II (same switch) Alan KB7MBI In a message dated 7/11/2008 1:23:
I have been pleased with RF PARTS http://www.rfparts.com/c-uhf.html Alan KB7MBI **Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food.aol.com/tyler-fl
Tony Let me offer a suggestion based upon having similar problems in the past with getting a match. I discovered that the coax feedline connections were not sound and the poor solder connection overt
That is cheap. A few weeks ago they were selling for $75 EACH and not on that site. Lets see: Radio (alone) ..........................$250 Nine modules ($75 each)..........$675 New old stock mobile b
Have you tried _www.anywho.com_ (http://www.anywho.com) ? Alan KB7MBI Woodinville, WA FISTS: 5702 CC: 1885 ARS: 582 SKCC: 1988 NAQCC: 058 ARCI: 12141 ** See what's new at http://www.aol.com
It appears to me with all the recent discussion regarding linear amplifiers that the real question should not be HOW DO I INCREASE MY POWER but rather HOW CAN I SET UP A MORE EFFICIENT ANTENNA? The h
I thought my Scout package was complete with all the modules, PS, bracket, and LDG Z-11 ATU. But you know all the concerns regarding having enough voltage when using batteries? Well after doing some
Bob The construction of the VOLTAGE BOOSTER I got was excellent. They will send you a picture of the internals if you request it. I was originally looking at building my own but the cost differential
David Barlow was very special. I knew him only about a year and a friendship grew out of the sale of his Paragon II station. We chatted almost weekly landline and it was as if I had known him for a l
For used radio prices you really need to perform the following: --GOOGLE (GROUPS) and list item --GO TO http://www.ac6v.com/swap.htm --Search eBay for current and completed sales in ADVANCE SEARCH fo
For a good guide for resale terminology you might want to view the following: http://www.wa9tgt.com/Drake_Grading_Standard.html Alan KB7MBI Woodinville, WA FISTS: 5702 CC: 1885 ARS: 582 SKCC: 1988 NA
I had archived this note regarding the SCOUT background HISS remedy. I contacted TEN TEC this morning and was told there is no real "fix" for the processor hiss. Using high impedance headset helps so
Jim, What happened? Did it turn out to be a dog of a radio? Alan KB7MBI ** AOL now offers free email to everyone. Find out more about what's free from AOL at http://www.aol.com.
I had inquired on the LIST regarding battery and charger set-up for the HERCULES II. There were several recommendations to use a pair of Trojan T-105 golf cart batteries in series with a BATTERY TEND
I have spend about a week milling thru the Ten Tec Archives reading the posts regarding running the Hercules II on battery power. I have read the wide range of suggestions from a couple of 6v golf ca
Regarding the question as to the battery and set-up for the Hercules II: In spite of all the non-answers I received I did get some good advice: BATTERY: good quality 100Ah deep cycle marine type batt