I am selling my OMNI V with the following options: N4PY OMNI V.92 chip (also Original Ten Tec chip) 1.8 kHz filter in 2nd IF 500 Hz CW filter in 2nd IF New uncut power cord with snap-pac breaker Fact
OK folks I have a new to me OMNI V that has an open slot for the 282 250 Hz CW filter. I have had these filters in the past, and hardly ever used them, but an empty slot is just sitting there, and i
I own a 229 tuner, and I have never used the meter. If it ever died, I wouldn't care because it is of limited use. I would recommend finding a good external meter that will read CW & PEP like the Ame
In the past I owned a Corsair II, and an OMNI VI option 2 which I ran using a Samlex Switching power supply, and no circuit breaker. Same for some other non Ten Tec rigs. I just purchased a very nice
Thanks to all that replied to me both on and off the list. Having thought it over, I came to the conclusion that the price of a circuit breaker is way less than what it might cost me if I blew the fi
If anyone has scrapped out a Ten Tec rig with the thin coaxial cables that are used to plug into the circuit boards, I would like one to use as a test lead. The length is not too important. Longer is
Guys, I thank everyone who replyied both on and off list, but I am not interested in purchasing a plug, paying for a minumum order amount, and soldering up a cable. All I am looking for is someone wh
I recently purchase a mint OMNI V which came with a very nice matching 962 power supply. I am sticking with the OMNI V, but I already have a 35 amp power supply that powers everything else on my desk
Selling a very clean Ten Tec OMNI VI Option 2 (where all the upgrades were done at the factory). It is in perfect operating condition and has no issues. I have been using it regularly until today, an
I just recently aquired an OMNI VI Option 2, and have moved my Kenwood TS-830S into storage. The one thing I really hated to give up is the LP Pan Panadapter I had connected to the IF output on the 8
I just removed the #218 filter from my OMNI VI, because I replaced it with a 500hz filter, and will sell it for $65.00 shipped via Priority mail. I will accept a check (ship when it clears), PO money
I am looking for a 700a hand mic in good working condition. I would prefer one with a 4 pin plug, but that is not a deal breaker. Please reply off list. Thanks, David - KE6YX
I just purchased an OMNI VI Option 2, and when keying in CW, I hear a faint relay sound. It is there using the internal keyer, or an external keyer. I have the amp relay turned off, and have heard it
I do not use any Ten Tec microphones here. On my Kenwood TS-830S, and TS-130SE I use a Shure 444D, and on my OMNI VI Option 2, I am using a Shure 450 series II. Both have received great audio reports
I have an Omni VI narrow question My Omni VI Option II has a 1.8 kHz filter in the first IF, and also a 1.8 kHz in the second IF. When I select the NAR button, the volume increases, and I end up re