A few years ago I had control codes for the Omni VI, including some that are not documented in the user manual. It is those latter codes I now seek, particularly any related to filter selection. Does
I thank those who found the basic code to address the Omni VI with undocumented codes. I probed further, and here is what I found: Send this command to the Omni VI: FEh FEh Receiver_Address_h Sender_
If someone in this group uses a Pegasus or Jupiter with Logger32, I am interested in whether it is possible to use both the regular or N4PY control programs while also using Logger in communication w
Art, Boy, do we have different takes on the matter. When Ten-Tec started internet-access radio it intrigued me, but something nagged at me. You have nailed it, but from the opposite point of view. DX
I have a Ten-Tec Model 253 KW Automatic Antenna Coupler for sale. It is not working. I am positive that the only thing wrong is the main T/R relay, a vacuum relay that is no longer available under it
Omni users, if you could have only two optional filters for CW, what would they be and in which IF(s)? My guess would be a 500Hz in each IF. But that is the only combination I've tried... Bill K3UJ I
Boy, did this hit home. I have not operated my Omni VI much this summer--I was too busy putting my 31-year-old BMW R75/5 back on the road. Of course, the dealer has batteries, filters, bolts, nuts,
Ed, In most cases, all you need to do is to reduce the output power from your sound card to the transceiver microphone input by a factor of 100. Do this with the following two-resistor divider circu
I am trying to get the CT program to talk to my Omni VI. When I change bands using the alt-f1/f2 commands the omni changes bands but always goes to the band edge - 3.500.00, 7.000.00, 14.000.00 , etc
I have a Brown Bros. keyer paddle and a Bencher straight key. The Brown Bros. won't stay put. I'm considering a Bencher BY-1 or BY-2. Anyone like this one or have another recommendation? Larry, W3UIO
Wow! Every Tent-hecker absolutely MUST take a look at Paul's W8KC site, in which Paul has peeled back the top layers of the Tent-heck Onion, revealing the exciting technology within. The new Onion te
Allan, You did not mention that you had used the Omni VI menu to set the baud rate to what you had been using with the original Omni VI. Check that menu item. I have made that mistake a number of tim
I have followed the thread about narrow filters with interest, but I note that no one has mentioned using very narrow filters on PSK31. The theoretical bandwidth of this slow mode is 50 Hz., and I do
I have hated the SSB audio on my Ten-Tec Omni VI (whew, got the magic words in, I am OK for this reflector) since the day I got it. It only sounds good in a headset; no speakers work well; I tried ma
As I understand the situation, the Omni VI will do this. The question is whether the software that is communicating over the serial port to the Omni will allow the computer to do its part. This can b
I have a situation similar to many Omni VI owners. The PBT does not seem to sound the same for USB and LSB. I can find a spot in the PBT tuning range where the noise sounds the same as I switch betwe
No, the Omni VI and VI+ serial port commands include PTT control. There is already an FSK port in the Omni VI and VI+, but I do not see how an FSK input helps with CW keying. 73, Jan Ditzian KX2A kx2
If someone in this group has interfaced Pegasus/Jupiter and Zakanaka, I would appreciate hearing about what was necessary to get the basic computer interaction going. This would go in the Help file t
I see this kind of message constantly, so I thought I would let TenTec users in on the secrets. 1.To transmit PSK you need an interface between the Sound Card OUTPUT and the mic or rear audio INPUT.