I'd also like a schematic for the Century 22. There;s nothing wrong with mine, but I like to have circuit details for all my gear. -- Cheers and 73, Stan Barr G0CLV G-QRP 3369 g0clv@dsl.pipex.com "Ne
I had that problem when the psu was on the right of the rig. Moving it to the left cured it. -- Cheers and 73, Stan Barr G0CLV G-QRP 3369 g0clv@dsl.pipex.com "Never leave well enough alone." - Raymon
Thanks for that, I finally got a Century-22 manual! -- Cheers and 73, Stan Barr G0CLV G-QRP 3369 g0clv@dsl.pipex.com "Never leave well enough alone." - Raymond Loewy _________________________________
My Corsair II has a noticeable hiss, however the hiss is quite narrow band and turning the notch filter to about 7 almost eliminates it without really affecting the received signal. -- Cheers and 73,
Some references here: http://www.vmars.org.uk/nvis.htm but not really helpful as to dates. -- Cheers and 73, Stan Barr G0CLV G-QRP 3369 g0clv@dsl.pipex.com "Never leave well enough alone." - Raymond
Mine, purchased from KW April '88, is serial No.2408. -- Cheers and 73, Stan Barr G0CLV G-QRP 3369 g0clv@dsl.pipex.com "Never leave well enough alone." - Raymond Loewy _______________________________
I've got an ex-(British) Army generator like that. Hard work. You need a lowly private to do the cranking! Me too - still drinking my first espresso of the morning... I'm Ten-Tec in the shack, ex-Arm
Lavazza espresso here too... My army hf set (UK/PRC320) has no display, the frequency is set to 100Hz via rotary stitches. Nice, well liked set. Typically rugged, but heavy - particularly If I'm carr
Hi, I have a Century/22 and I recall seeing mention of a mod to raise the audio filter frequency - a little low for my taste. Can anyone point me to it? I've got to dig inside the rig to replace the
[Stuff abt Century22] Thanks for rhe very useful info...one day I'll find the time to mod mine! I fitted a Kirsta keyer from a Knaga - does a fine job. -- Cheers and 73, Stan Barr G0CLV GQRP-3369 FIS
On 10/03/13 02:16, Adrian Rees (MW1LCR) wrote: Hi all I have just acquired a Corsair II, and am very impressed with it so, far. However, in two of the 7 segment displays, the LED's are not lighting.
What you describe is my usual technique, although I also switch off the AGC. As you know this approach allows the receive to function with maximum dynamic range. Its just a shame that the Corsair II
What you describe is my usual technique, although I also switch off the AGC. As you know this approach allows the receive to function with maximum dynamic range. Its just a shame that the Corsair II
My Corsair has a pronounced noise peak around 2KHz (I've not measured the frequency, so I'm guessing). It's arising before the notch filter as I can notch it out which improves the sound quality eno
My shack is Red,White and Blue :-) Ten-Tec Corsair 2 Ten-Tec Century22 Racal RA1792 Rx Racal RA17 Rx Ex-British Army RT320 transceiver British and American morse keys Antennas made by me... (The Unio