Re: [TenTec] Corsair II buzz

[Stan Barr <g0clv@dsl.pipex.com>]

yash@aol.com wrote:
>  Gary
> ?I found my corsair II to pick up a hum/buzz if the supply is close to the rig 
> ,moved it 3 feet away and all seems ok now. That was a 961? tt supply. Maybe 
> comming from a source in your house?
> good luck
> dale wt4t
>
>
>  
>
>  
>
> -----Original Message-----
> From: Gary Smith <Gary@doctorgary.net>
> To: tentec@contesting.com
> Sent: Thu, 2 Apr 2009 9:01 am
> Subject: [TenTec] Corsair II buzz
>
>
>
>
>
>
>
>
>
>
> I've got a Corsair II I'm planning on recapping with Ultra Low ESR 
> electrolytics. There's a high pitched buzz I can hear which is 
> distracting somewhat but is mostly absent when the narrow filters are 
> engaged.
> It was there when I sent it to the factory for repair several years 
> ago and they found no problems but I notice it and it was not there 
> on my Omni and is not there on my other radio (not a Corsair).
> Any suggestions of which board I might start replacing the caps on to 
> eliminate this noise?
> Thanks!
>
> Gary
> KA1J
> _______________________________________________
I had that problem when the psu was on the right of the rig.  Moving it 
to the left cured it.
--
Cheers and 73,
Stan Barr  G0CLV  G-QRP 3369   g0clv@dsl.pipex.com

"Never leave well enough alone." -  Raymond Loewy