winkey is lovely at times but totally unnecessary with the setup of N1MM and the Orion. my Orions work fine with N1MM and the keying is excellent. the settings I gave for the Orion are what N1MM repo
two of the original Orions, built close to the front of the production of the Orion line sit side by side on my desk. I am running the last of the 1.xxx firmware on both. I had to change the internal
would an unun help to keep common mode current from flowing? jack ak7o I have a Tec Tec Auto Coupler that is turned off and a Ten Tec Hercules II at full power. The SWR bridges in side the equipment
after all I have read on coaxial cable, I would choose the LMR-400. the difference in signal loss at such a short run would not be noticeable to the ear. jack ak7o --Original Message-- From: GARY HUB
I agree. something may be loose inside. there are lots of things that could go awry when taking the Orion apart for a simple battery replacement. I would take it apart as if replacing the battery and
as for MixW check with the provider for use on a second machine. maybe the code he sent will work on a second machine but maybe not. the license has to be verified by internet connection. of course y
Question: is there a way to turn down the audio gain from the I/O DIN connection on the back the Orion? I have 2 Orions and have them connected to a Yankee Clipper SO2R+ which feeds the audio thru to
thank you, jack ak7o The 'OTHER' menu provides a setting of High, Medium or Low for the Line Level Output 73 Dave WA3F -- Original Message -- From: "Michael Cheponis" <Michael@Cheponis.Com> To: "Disc
thank you, jack ak7o Check your manual for the DIN jack. Mine is item #80 on page 28 & it states that Pin 4 of the DIN connector is 'line level audio output. Which receiver(s) are output to here and
thanks for the suggestion, jack ak7o Jack, see page 28 of the Orion manual: "Pin 4 is line level audio output. Which receiver(s) are output to here and the level of audio sent to the jack are control
thank you, I have learned that the OTHER menu item on the Orion allows for LOW MEDIUM HIGH. I will try that first. jack ak7o Question: is there a way to turn down the audio gain from the I/O DIN conn
thank you jack ak7o Jack: Under [Menu], [Other]: You can use [Line out Level] to select Low, Medium or high. Default is High. That should correct your problem. Good luck! 73, Jack, W9OWO Question: is
Thank you for the discussion of replacing the display on the Orion, Denton . should I ever need to do that myself, I will gladly refer to your notes. 73 jack ak7o
One does not need a Rascal for RTTY with the Orion. one can use the cables that came with Orion for RTTY direct to the computer. I have done exactly that for all the years I have had my Orions 565, m
Joe, the Orions come with a cable that connects the Orion to any computer that has serial ports or one can use a serial to USB cable. one of the lines is sound in and the other is sound out which con
you are right Ted. my eyesight is not as good as it was 69 years ago. well maybe it is? HI. Pin3 is correct. jack Jack, I think you made a typo regarding pin 4. Fwiw, my copy of the Orion II manual (
without tuning my Orion's (565 both) show SWR of about 1.2 into the T8 log on several bands. tuning with the internal tuner can bring the SWR to 1.1 to 1 on a couple bands. jack ak7o Wondering if any
Rick, when I do the steps noted in adjusting the S-meter, the 3rd step: PUSH PWR cancels everything and one is back to the normal screen. is there something I am missing? jack ak7o The Orion (565) ha
565 of which I have 2, jack ak7o --Original Message-- From: Barry N1EU Sent: Saturday, October 27, 2012 3:20 AM To: Discussion of Ten-Tec Equipment Cc: Orion565 Subject: Re: [TenTec] Orion 565 S-mete