You don't have the PS on the LH side of the radio, do you? Phil C. Sr. k4dpk -- Original Message -- From: "Steve Hanson" <hanson@pioneerwireless.net> To: <tentec@contesting.com> Sent: Sunday, March 0
Andrew.... If I'm not mistaken you said the meter is steady in the Power Out and SWR positions. That being the case, I'd suspect a dirty contact on the meter switch. Why not clean them and see? Phil
I'm looking for a logic board for either the Omni VI or VI+. A working one is preferred but not entirely necessary. Please let me know via e-mail. Thanks guys... Phil C. Sr. k4dpk@comcast.net
If it isn't doing it on any other band, I'd say he has either a loose connection in the 10m LPF circuit or a bandswitch contact burned on that band. If it does it on other bands, there are other poss
John... I also posted on here a couple weeks ago for a logic board, dead or alive. I have had ads running on QTH.com and on QRZ.com for the same for over a month, with no results so far. I had the sa
Drift is usually a fairly slow change in frequency, most often caused by changes in temperature. A sudden and abrupt shift in frequency, or "jump", is usually due to some mechanical problem, like a l
I do not believe the issue with the Ten Tec PTO mechanics is one of wear in the planetary drive, and I will explain my reason. The drive is made up of ball bearings, tracking in a bronze race. We've
Gentlemen.... I need either one working or a couple of non-working Logic Boards for the Omni VI Plus. If anyone has these or chips from them, please contact me off-list. Also looking for Paragon and
I am looking in particular for the DS-1285 clock chip, the logic and the DSP chips. Anyone have these or info on a source please contact me off list. Thanks much Phil C. Sr. k4dpk -- Original Message
Yes. AGC is on when the button is OUT. The legend is on the RH end of the row of buttons. Phil C. Sr. k4dpk -- Original Message -- From: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net> To: <tente
Ernie.... You say you had the carrier completely eliminated, and it re-appeared. How are you measuring? Do you use a scope, a wattmeter or a report from another ham? I've found it easier to listen on
I am in need of a transmit audio board (#81597) for the original Omni VI. Anyone have one laying around? If I have to do some troubleshooting, it's OK. Please let me know off list. Thanks and 73 Phil
Diodes in the SWR bridge on the LPF board may be leaking. Phil C. Sr. k4dpk -- Original Message -- From: "Jeff" <n3jbh@yahoo.com> To: <tentec@contesting.com> Sent: Wednesday, December 17, 2008 7:46 P
Dan, You are gonna like that RAB. Let's you rag chew on one freq while waiting on your call area to come around on the other freq. Use the A-B pot as a balance control between the two frequencies. Ph
Can't say for sure, of course, but a "talking-under-water" sound is descriptive of a PLL trying to come unlocked. 73 Phil C. Sr. k4dpk -- Original Message -- From: "Bill and Cindy" <wb0o@yahoo.com> T
Dave... Is your e-mail to the group stuck in your outbox? I've gotten it 6 or 7 times. Phil C. Sr. k4dpk -- Original Message -- From: <d.e.warnick@comcast.net> To: <tentec@contesting.com> Sent: Wedne
Hmmmm....Anyone else get it more than once? Phil C. Sr. k4dpk Phil, Don't know if it is Dave's problem, I only received one copy of his e-mail. 73 Don K5AQ ___________________________________________
OK....Must be on my end. Sorry, Didn't mean to dilute Dave's message topic. Phil C. Sr. k4dpk -- Original Message -- From: "Gary Hoffman" <ghoffman@spacetech.com> To: "Discussion of Ten-Tec Equipment
What a deal! Phil C. Sr. k4dpk -- Original Message -- From: "Craig Simmons" <k910dog@gmail.com> To: <tentec@contesting.com> Sent: Wednesday, October 15, 2008 10:32 PM Subject: [TenTec] New Ten Tec OM
The problem with the NTE replacement is that two of the tabs are turned 90 degrees and won't fit the PC board slots. Some of the other mfrs are same way. Phil Chambley, Sr. k4dpk On Tue, 2008-01-01 a