Try any of the mics but I found that getting the Hiel element for the D 104 mic is the best of all the worlds. Also any of the Ten Tec mics will work well. You can find some used TT mics sometimes on
Works just fine with N1MM here at my shack. Be sure you have all the settings for the comport. If you do then it is probably the port you may need to try another one. Also make sure the O7 is set up
I was quickly reading the new CQ magazine and I came across an interesting fact about the K3 that I did not know. I sure you all know this but evidently to use the built in digital modes like RTTY an
Thanks for all the comments it is quite interesting and my only point, which I forgot to mention, was that TenTec plans on providing direct keyboard input for these digital modes. That way you just n
You guys! N1SW Sales information and support for current Ten-Tec products is now available via 2 way audio/video on Skype. We have webcams set up at the sales desks in the lobby and will have one ins
HI, the resonate control moves a slug up and down and as time goes on if becomes subject to gravity. In the past I have taken the know off and placed a felt washer behind the know to create a little
Send one here if you please S. F. B. Morse III, W6FZZ on CW speed _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinf
You only get one shot at a first impression. After allowing the radio to come up to room temperature, power was applied and lo and behold there's life in the new black box. First off, fit and finish
Stuart Rohre wrote: Mike, if you have the very oldest D 104, the bad audio reports you describe are typical of an impedance mismatched D104. It is a high impedance mike. To use it for modern low to m
Now, I am referring to the NON amplified D 104's. Not the CB ones with a preamp in the base. Stuart K5KVH _______________________________________________ TenTec mailing list TenTec@contesting.com htt
KC7WV wrote: I have a fairly new OMNI VII - which works great, BTW! I'm just getting around to hooking up the remote internet setup. Being a novice at this interface stuff, I'm having some difficulty
Well the SS contest has past and this is the first opportunity to try out the O7 on crowded SSB bands. Overall the performance was good however I am hoping there is a way to replace the 2.5 filter wi
I was fortunate last Christmas to received a Heil Pro headset which is very nice. Heres the problem! I attempted to use it on the OMNI VII only to find out that I can't use the PTT cable with the rig
73 Bob, K4TAX I was fortunate last Christmas to received a Heil Pro headset which is very nice. Heres the problem! I attempted to use it on the OMNI VII only to find out that I can't use the PTT cabl
ND0N After using my new Omni VII for several weeks now I haven't decided if it is band conditions/atmospheric conditions but the background "rush" noise seems higher than I recall with the Omni VI Pl
I have had a used Scout now for quite a while and I was wondering how effective the noise blanker is supposed to be. I have been recently using the rig in my car and I notice that the noise blanker s
Ernie Piche N1SW wrote: I have had a used Scout now for quite a while and I was wondering how effective the noise blanker is supposed to be. I have been recently using the rig in my car and I notice
Say I obtain the Omni VII radio and make good use of its Ethernet control with OMNIVIIOnePlug program (and let's assume this works). For total automation of the station, should I rely on the internal
I don't remember if it is normal or not but is the 'MON' label on the bottom of the screen always set to 'ON' or do I have something wrong with my radio? Pressing 'ALT' and 'MON' will bring up the mo
I don't remember if it is normal or not but is the 'MON' label on the bottom of the screen always set to 'ON' or do I have something wrong with my radio? Pressing 'ALT' and 'MON' will bring up the m