I use Sony wireless headphones and that solves the problem, but my Heil headset with mic has the same trouble. Luckily I only work CW most of the time. Tom, N5GE http://www.n5ge.com http://www.eQSL.c
The one in my Orion II works quite well and when running low power (100w) I use it exclusively. As to the TS930... I have two TS-950s here and they have excellent tuners in them. Certainly much bette
Below: Everything you say is true, but you forgot that 1/4 wave verticals have no gain and unless you put it on a pole with a ground plane of at least three radials in the air or put a lot of radials
But if you have an Orion II, he said the new board will work with it. Why buy another one to get the feature. My understanding was that the O II is ready for it now. It just needs to become available
You can key the Orion II using the serial port from the computer to the Serial port in the rig. It's actually a pretty simple procedure if you are a programmer. Just download the Orion Programmer's G
Below: [N5GE] That was probably me. If you download the Programmer's Guide from the Ten-Tec web site you can read about how it is done, but you will need to know how to program in some language like
Thanks, Martin. I had read the manual but had not tried it, so that's good information. Tom, N5GE Tom, N5GE http://www.n5ge.com http://www.eQSL.cc/Member.cfm?N5GE
Gentlemen and ladies: Those of you who are interested in software development and how it should be created or used, please take this discussion to an appropriate forum dedicated to the subject. While