A few years ago, in the mid 60's I had an occasion to need some attenuation. I simply turned to a Hallicrafters bulletin (12) pages that gave Attn in Db from .1 in .1 steps to 100 watts. Two tables:
John, Since you know what each letter stands for. Move on up to whatever you want to achieve. Of course if you wish to stay with the "See Spot Run Fellows" does not really matter. If you wish to copy
John, there is not much out there that I know of, for good practice, a real shame. Not like the old days when we could practice by copying Press for ships newspapers. That was really good. Not sure w
Ment to mention all three of us use Ten Tec equip, sometimes Omni 6 plus, sometimes Corsair 2. Hard to beat a Corsair II for higher speed. Both very good. Lyle W9FCX
For those starting out typing give some thought to DVORAK instead of QWERTY. Myself I am too old to be switching otherwise I would sure do so I have skin grafts on one hand with webbing between finge
On that DXCC check the connectionson the trap. I bought one once and there were no washers, the little trap wire was imbedded in the plastic. Put together very poorly, ended up trashing all but the c
Abbreviations used by amateurs Short Full Short Full ABT About CUAGN See you again AGN Again DE From AHD Ahead DA Day AHR Another DNT Don't ANI Any DINT Did not APRX Approximate-Approximately DH Dead
Looks like only one column printed out, its only half there it would seem. Could send direct from Microsoft Word if anyone wants it. Should work. Anyone interested let me know. Lyle W9FCX qskqrq@gric
David, Carl es Ron, Time has a way of changing things, its called progress, perhaps but not always. Hi Was a time when calling "CW TEST" had nothing to do with contesting whatsoever. It ment you were
Jim Did you happen to inquire if the K3 has any Tee voltage that can be brought out? Am speaking of voltage they must use to switch back and forth from xmit to rcve. Lyle W9FCX
John Its not been very long ago that we went from Able, Baker, To Alpha, Bravo so as not to confuse foreign or allied people. Most Americans, outside of military, it would seem, use whatever comes to
Ross You have an offset when you go fm SSb to CW. Am sure there is a good explanation in your manual. If not will explain but it would be better for you to study it. That was what was good about the
David Keep up the good work. CW can be easy and fun but lots of folks seem to want to make hard work out of it. Been pounding brass now nearly 70 years, a lot of those years as my life's work. Slow C
Paul, My source tells me its quite true, I guess mainly due to his poor health and his widow is going to close. Surprised you never heard of Peter Dahl, thats not like having heard of a transformer,