Walt K5VV Gary, I still vote for the trip to TT, I'll go with you just to make sure your backcast is a closed loop. Drop off rig at TT and head for the nearest trout stream....life is good Ed W3NR
73, John I will also recommend Ubuntu for a newcomer to Linux. If you take the time and do some reading, you will see that you can run it as a livecd. No installation required. Be aware that as a liv
guess what? The usb serial adapter automatically adjusts the com ports. so the usb adapter is now com 5. great! The ten tec software only goes to com4! oh.. it gets better.. If I unplug the com1 seri
phillip shore wrote: I have the 540 analog Triton IV that has a warble on 80, 40, and 20m on receive. I haven't tried to transmit on these bands yet. The receive sounds just a little shakey; like eve
Philip Leonard WVØT wrote: I have an Omni VI opt3 and I am trying to use it with MixW but I can't get MixW to key the radio. I can change the frequency via MixW but no luck getting PTT to work. I hav
I have an Omni VI opt3 and I am trying to use it with MixW but I can't get MixW to key the radio. I can change the frequency via MixW but no luck getting PTT to work. I have MixW set for an IC-735.
_Lots of inexpensive USB to serial adapters are available and most of them work for general purpose serial communications. Trouble is lots of times we are asking our Serial port to actually work as a
Has anyone ever been able to get PTT via the rig to work using the setup shown in the manual ? If so how ? Did you need to build your own serial cable ? Ed W3NR
Am I right in assuming that this can be used for a beverage and/or a separate RX antenna or device such as a MFJ 1026 noise canceler ? Just want to be sure....tnx...73 Ed W3NR Debian GNU/Linux
Logging: I desperately need a Linux logging program! I tried to install LiHaLo but am not that good at MySQL. Using StarOffice Calc's spreadsheet, I relied on "autocomplete" as a dup checker... it us
john.brewer@us.schneider-electric.com wrote: The info in the manual on how to interconnect the Omni VI is not clear to me. Do I need to switch Rxdata and Txdata on the cable used from the Omni to the
But how do I get Xlog to insert the Orion's frequency into the log itself? Trying to duplicate the old ARRL Logbook, I used one of the customizable boxes to create a "Freq (MHz)" and that's really wh
Carl Moreschi N4PY 121 Little Bell Drive Bell Mountain Hays, NC 28635 -- Original Message -- From: "Ed" <w3nr@comcast.net> Cc: "TenTec" <TenTec@contesting.com> Sent: Sunday, November 19, 2006 3:56 PM
Thanks, Dave W7DPW Dave, actually not that difficult to implement. I used the headphone jack to line-in on the computer for RX. For TX I used the RTS line from the computer serial port to a stereo pl
I have been looking at some recently and they are finally in a price range I can afford. Was this a high end rig in the late 80's or a mid range rig? One of the criteria I use to judge rigs is how ma
I'll take them all.............do you take checks....(wink wink)......hihihoho Ten Tec Argonaut Model 515 SN 0675 $250.00 Ten Tec Century 21 Digital Model 574 SN 0045. Was fully serviced at Ten Tec o
I'm toying with the idea of getting a "non digital" rig. I'd like to have most of the capability of an Omni VI without any PLLs. Just crystals and a PTO. I don't care if it can operate in any modes o