- 1. [TenTec] RF Out problem on Orion 565 (score: 1)
- Author: Vance Leedy <w7iex@sbcglobal.net>
- Date: Tue, 13 May 2014 14:19:23 -0700
- My Orion has a problem in that it will reduce power from 100w to approx 25w primarly on dits during cw operation, not all dits, just one or two now and then if it is in a failure mode. Of course this
- /archives//html/TenTec/2014-05/msg00272.html (8,217 bytes)
- 2. Re: [TenTec] RF Out problem on Orion 565 (score: 1)
- Author: Vance Leedy <w7iex@sbcglobal.net>
- Date: Tue, 13 May 2014 16:47:59 -0700
- Barry, Have changed those caps twice if not three times. Everytime I put a set in, someone would say that they must conform to a spec that those I just put in did not meet. If necessary,k I can buy a
- /archives//html/TenTec/2014-05/msg00288.html (9,774 bytes)
- 3. Re: [TenTec] Power output down on Orion (score: 1)
- Author: w7iex <w7iex@sbcglobal.net>
- Date: Mon, 10 Aug 2015 16:27:52 -0700
- Check those little relays on the A0 board. I had 100w out on the meter, but 0w at the connector. If you don't have a built in tuner. there's a short jumper that carries rf as well.Good luck.VanW7IE
- /archives//html/TenTec/2015-08/msg00053.html (7,877 bytes)
- 4. Re: [TenTec] Sherwood Report (score: 1)
- Author: w7iex <w7iex@sbcglobal.net>
- Date: Wed, 27 Apr 2016 16:42:33 -0700
- Sent from my Verizon Wireless 4G LTE smartphone Hello Rick - Agree, the report should be changed for SDRs. I would also propose that the ICOM 7800 numbers are much improved on the last versions. Th
- /archives//html/TenTec/2016-04/msg00242.html (8,108 bytes)
- 5. Re: [TenTec] Sherwood Report (score: 1)
- Author: w7iex <w7iex@sbcglobal.net>
- Date: Wed, 27 Apr 2016 16:45:10 -0700
- Sorry, hit the wrong button. Sent from my Verizon Wireless 4G LTE smartphone Sent from my Verizon Wireless 4G LTE smartphone Hello Rick - Agree, the report should be changed for SDRs. I would a
- /archives//html/TenTec/2016-04/msg00243.html (8,203 bytes)
- 6. [TenTec] P.A.Bias (score: 1)
- Author: vance leedy <w7iex@sbcglobal.net>
- Date: Tue, 9 Jan 2018 17:33:18 +0000 (UTC)
- Hello all, I may have an issue with the bias setting on my Orion 565. Before I send it off across the country, can anyone provide me with the bias current settings? Looking at the schematic for the
- /archives//html/TenTec/2018-01/msg00004.html (6,885 bytes)
This search system is powered by
Namazu