Good story Don... Sorry you had to deal with that during FD... Hi Hi I started out using my Omni 7 during FD this year but swapped back over to my Omni 6+ with the INRAD filters and Roofing mod. THe
Hi, I have a Timewave DSP 599ZX for sale. The case has some scratches but not too bad. This one does include the latest 5.07 firmware and works GREAT! It really shines on with my Corsair II and Omni
Hi Don, I haven't checked in a year or two but the self adhesive vinyl paper was available at K-Mart in my area a few years ago and it was fairly cheap. You might try Wall Mart, or some of the Automo
Radio History is Made at WRC-03 with 7-MHz Realignment Compromise (Jul 3, 2003) -- There's good news from World Radiocommunication Conference 2003 (WRC-03) for 40-meter enthusiasts. In an 11th-hour
Wow, I thought we had it rough only making 512 contacts from our 1A station at Lake Rabon Park in Laurens, SC; Band conditions were horrible indeed... I almost think we need to take up a collection t
Hi, Please excuse this question which is a little off the beaten path. I recently bought a 2 element KLM 40 meter beam and a 120 ft of Rohn 25G to put up a 160 meter vertical with the 40 meter beam o
Thanks to all who responded to my request for a KLM bracket. Within a few hours I had the information needed and parts will be ordered today. You folks are GREAT ! ! ! ! 73, Glenn WA4AOS
Hi Stuart, Thanks so much for the information. I know I can always depend on the Ten Tec reflector to get information even when it's a little off course. This KLM beam look very nice and I hope to ge
Has anyone tried working AO 40 with a Ten Tec 2510 transverter and an MMDS down converter? I am not an expert in this area, although; I have had some OSCAR experience over the years, mostly mode B. M
Hi PHil, I am looking for a manual for the M 200. I just found one recently with no docs. Please let me know what you to get for it. Thanks and 73, Glenn Scott WA4AOS
You guys had me going, Vibroplex bought out by MFJ. THIS IS TOTALLY WRONG ! ! ! Horrible Ten Tec paddle. WRONG AGAIN ! ! ! Misaligned parts. SO WHAT ? THE PADDLE IS MADE TO ADJUST ! Deformed parts. M
Hi George, Thanks for bringing accurate and well thought out information to the reflector. I think you made a good point about keeping it stock and thus a Ten Tec/Vibroplex Paddle as opposed to a mod
Hi, I had heard rumors about a secret Ten Tec Car but just dismissed them as a prank. However, Ten Tec does have government ties and this appears to be some new High-tech car being developed for the
Any suggestions on contesting software that is Ten Tec Friendly while being a very good contest program? I am using TRLog and I like it features and versatility, However, I don't care much for it's 8
Hi, I am trying to wire up a model Ten Tec 299 Voice, ID unit for a friend. On the input connector there is one is red and appears to b e for 12 volts and also a piece of coax, used for signal input.
Hi, Have you been to Robert Sherwood's web page? He has a good selection of 70's through early 90's gear with good specifications. Even a few 60's receivers... <A HREF="http://www.sherweng.com/table.
Hi Guys, Can't can't can't we just all get along???? booooooooo hooooooo I believe that a few of the comments expressed on the reflector regarding Scott/TenTec's input with regard to negative comment
Hi, I have a friend who has a Jupiter and does not see anyway to adjust the ALC level. The Jupiter is one of the few Ten Tec rigs that I have not used and I am sure someone on this reflector can give