I have been looking at the TenTec 715 speech processor on the Ten Tec web site and now saw a review on it in the latest QST. From what I read it would be very effective on a radio that does not alrea
I have the 715 and the Orion 1 I love both pieces of equipment. The Orion has been the best radio I have found compared to other hf icoms and kenwoods. the 715 i have for the 708 desk mic and the hei
You'll love the 715 with an Omni C. Dave WA3MKB I have been looking at the TenTec 715 speech processor on the Ten Tec web site and now saw a review on it in the latest QST. From what I read it would
Like a true ham the first, and probably wrong, idea is a transformer! Low to high impedance line transformer? Walt K8CV I have been looking at the TenTec 715 speech processor on the Ten Tec web site
Author: "CSM\(r\) Gary Huber - AB9M" <glhuber@msn.com>
Date: Sun, 15 Nov 2009 16:44:50 -0600
Ivin, While I have not tried my TT-715 on anything other than my Omni VI plus, my experiences with other TT transceivers lead me to believe you you will be well satisfied with the TT-715 driving the
Author: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Date: Sun, 15 Nov 2009 17:41:06 -0600
The 715 manual doesn't talk about older rigs. The audio input impedance is sure 47K set by a resistor to ground at the first audio amp input. The EV 606 prefers 250K to 5M according to its spec sheet
Author: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Date: Sun, 15 Nov 2009 18:00:27 -0600
Probably a guitar stereo 1/4" cable will do the output and a simple MC-1 to 1/4" stereo plug cable will handle the microphone side. Likely a standard cable in the guitar shop or RS. I know for certai