I have the 715 and the Orion 1
I love both pieces of equipment.
The Orion has been the best radio I have found compared to other hf icoms
and kenwoods.
the 715 i have for the 708 desk mic and the heil headset.
I use the 715 for the headset mostly. since its not a dx element. but when
running normal ssb I use the radio only and the 708
and for anyone trying to update there Orion1
no where could I find out how to do so when setting up the radio to start...(
you must turn on the radio while holding the user2 button and then you will see
the flash update on the lcd of the radio then release the button.)
I only found this on the Orion II area of the website on tentec.
no where in the manual. or the software for updates.
May Tentec will add this to the orion 1 area.
Steve N8IS
________________________________
From: Ivin Flint <ivinflint@yahoo.com>
To: tentec@contesting.com
Sent: Sun, November 15, 2009 1:15:43 PM
Subject: [TenTec] It the 715 speech processor for my Omni C?
I have been looking at the TenTec 715 speech processor on the Ten Tec web site
and now saw a review on it in the latest QST. From what I read it would be
very effective on a radio that does not already have speech processing in the
transceiver.
I wonder if it would be effective in my Omni C? I use a Electrovoice 606 high
impedance mic. The article says it takes any microphone with a impedance of
50kohm or less so I guess there is one problem. The hook up cables from the
rig to the processor sound like none are made for the stereo plug mic jack in
the Omni C. I think the manual of the Omni C calls for a high impedance mic so
maybe this isn't really for the vintage that I use.
I though bringing it up here might help more than just myself. Any ideas?
Ivin W9ILF
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|