Author: Froiseth Richard <rfwd6dok@centurylink.net>
Date: Tue, 8 Mar 2016 14:45:00 -0700
I have an Omni VI + with the Voice Synthesizer Board #257 installed. When I press the voice button on the front of the radio the voice announces the following: 80m, 40m announces 29731 no matter wher
silly question, but did this start to act up or did you buy a voice card and add it to the radio? There is a modification that needs to be done to the card if it came out of the paragon and into the
Author: Froiseth Richard <Rfwd6dok@centurylink.net>
Date: Wed, 9 Mar 2016 00:56:38 -0700
Mike, Thanks for responding to my question. I bought the Omni VI + from Ten Tec a few years ago and the radio came with the board installed. There were some things going on in my life at that time an
Here is what Ten Tec told me years ago: "If there is a diode just to the left of the MC74HC573 chip (third connection on the left edge of the card) place a jumper across it. Depending on the model of
Author: Froiseth Richard <Rfwd6dok@centurylink.net>
Date: Wed, 9 Mar 2016 09:55:32 -0700
Carl, Thanks for the info. I wrote Ten Tec a note and they wont give out any info without a work order. I use to be able to call and receive help on things like this, but I guess times have change. T
Hummm. thinking outside the box again So does that mean after Ten Tec get production up and running, and I buy a $3000 Omni VII+, and I cant figure out why this doesnt do that, Ill need a work order
Author: Thomas Kuehl via TenTec <tentec@contesting.com>
Date: Thu, 10 Mar 2016 20:16:13 +0000 (UTC)
This is part of what John Henry posted on January 4th regarding a portion of the new Ten Tec policies: "A second problem in the service department is with the time technicians spend on the telephone
Carl, Thanks very much for the info on the voice synthesizer board on my Omni VI +. I jumped the diode as you described and it worked! Thanks again. 73s Rich, WD6DOK _________________________________