<< I am in need of several Andrews 1/2" "N" Male Connectors and also several UHF 1/2" Andrews Female Connectors. Everett Jackson WZ8P -- >> Everett, My firm can supply immediate delivery on Andrews m
<< Is there anyplace on the Web that has TH6 dimensions?? Element lengths ect.....My manual is lost in the garage!! ;-) Thanks....Rich >> Rich, I have a manual you can have a free copy. Anyone else w
Hi Gary, DAVIS RF Co. has available well in excess of your requested 80,000 ft of # 18, insulated, at 1.376 cents per foot ! shipable from Alabama. I'm quite sure that this is 19 strand tinned but wi
Hi Sam, this is a 1/2", 50 ohm cable. The more recent models carry an "FXA" before the number, which denotes a smooth outer jacket (not corrugated like Heliax) and an "FLC" would indicate more flexib
Hi Lane, Butternut was bought out by Bencher some 2-3 years ago. Based on a survey here about 6 months ago, it appeared that Butternut is still rated highly. Hope that helps. Regards, Steve Davis, K1
<< I/m in the market for a new MFJ259B SWR Analyzer to help with summer antenna projects. I would appreciate any recommendations as to where I might get one for the best price. Thanks... Vic N4TO Vic
<< I have 2 pieces of Andrews LDF6-50 and want to join the two pieces together . How would I go about this ??? Does Andrews make some connector for this application ?? Thanks for any ideas or info..
<< I am getting ready to use 300 ft of LMR 400 DB made by Times Microwave systems for a direct burial situation. There is some kind of sticky stuff on the surface of the braid which I suspect needs t
Fellow TTalkers: I knew after comm'g with numerous suppliers about in line surge/lightning protectors for DC passing coax cables that I'd get to the bottom line real fast via you folks. Thanks very m
Hi Ian, You can use a std. UHF Pl259 for LMR 400 and for 240 (you mention 200, see further on). For the 240, use a UG176 adaptor, same as for 8X. Note: if you buy Times LMR and install connectors, th
Hi Ian, Glad to help. I'll respond in specific to you on your email but for the benefit of anyone else in the group: Most situations I have seen, the 23 cents extra (at our pricing) for LMR 400 Ultra
<< Hi Ian, Glad to help. I'll respond in specific to you on your email but for the benefit of anyone else in the group: Most situations I have seen, the 23 cents extra (at our pricing) for LMR 400 Ul
Hi all, Can anybody direct me to a company who would advise & sell a complete package for FM broadcast station including antenna, installation by purchaser?? Looking for as many sources as possible.
Hi Dick, We sell various hard line connectors, Andrews, Times, RFS and also we have custom made, by our engineer, low cost, commercial grad HL connectors made to fit almost any size cable. As far as
HI TTers: Ref to several observations and questions here recently: J.P., W2XX hits it on the head as noted below ref Mil Spec not being synonymous with buriable. No PVC outer jacketed cable should be
In a message dated 4/4/99 12:53:10 PM Eastern Daylight Time, k4sqr@juno.com writes: << Clive; Womens vinyl coated "bobby pins" work very well "pinning radials" to the earth. When purchasing 15-30 pac
Hi Sergio, I am acquainted with Amperite and have emailed them on your behalf ref. troubleshooting data and availability of a replacement part, it necessary. I have copied you separately on that emai
HI all. Have an application problem. An Ameritron remote switch passes 14 vdc through coax for control circuit. We are trying to find a coax line surge protector that is not a "DC blocked" type OR we
Hi Gene, Just a couple "off the cuff" observations. Personally, if I'm going to fall, I'd prefer to fall the least distance possible, like a few feet!, before any restraints play havoc with my somewh
Hi folks, all my fault. I managed to mess up a file and not realize it until a concerned TTer let me know he hadn't gotten his catalog. Some of these new revisions went out and some didn't. My apolog