Hey guys - I have come across Rohn 45 section that is hinged in the middle for tilt purposes. Would anyone know what kind of weight this can handle as in number of tower sections capable above this a
Thanks to all who have replied, I have plenty to review now. I wanted a starting place before I committed to this fixture. 73- W1JCW John _______________________________________________ _____________
He builds very high quality stuff, I have a few of his things.. Give him a call to discuss what you want, he takes all the time to ensure you get what you want. He makes all items himself and winds h
The guys at Hill are very helpful and have some of the best prices. I have called them on a few things and they take the time to ensure you get what you need and don't buy things that are not correct
Hi guys - What is your preferred way to solder an open wire feeder on say RG8 or RG213 ? I know some cut the brand down the middle, solder it at the base and work their way to the tip. Some twist it
Hey guys - I believe there was a topic in this forum but I cannot find it via a search about a source for trucking brokers that would pick up a tower or other heavy goods and delivery it. Does anyone
Hey guys - I have an RV-7C and tried the 75/80 add on 5 years ago. It is a real piece of crap and never worked at all, it was certainly a waste of $90. I spent hours with Gary Jr and Sr from Mosley t
Trident Metals in Richardson, Tx They have everything you want and at the best prices. http://www.yellowpages.com/name/Richardson-TX/Trident-Metals Trident Metals 405 N Plano Rd Richardson, TX 75081
NoAlox is available Home Depot and works great. 73- W1JCW John _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contest
I have one of these as well, it's a nice piece of hardware. 64' total height 135 pounds at apex Base to hinge 29' Hinge to apex 35' Wind load with guys at hinge and apex, 30 psf is 17.2 Source: Rohn
Hey guys - I was looking for opinions of what current production vertical would work well for tower installation. I need 80m - 10m coverage. I know a dipole would work better but the folks don't want
Walmart has those trailer hitch connectors cheaper than any autoparts place. You can also obtain 6 or 8 conductor as well. 73- W1JCW John _______________________________________________ _____________
Thanks Kathy that sounds like what I need. John Ryan, You might check to see if you have a Red Wing Shoe store in your area-we have 3 here. They carry a work boot with a steel shank (?) or sole-not t
I to did the same thing. I was sure that I would be able to erect something of use and not be one of these people complaining.. gee I have restrictions and we just bought this house but my wife loved
I slope mine at a 45 to a 4:1 balum, coax into the shack. I would think at least 1'. 73- W1JCW John _______________________________________________ _______________________________________________ Tow
Hey guys - I have a rohn 25 hazer and I need a few parts. Who would be a good source for the rollers, bushing and some bolts ?? 73- W1JCW John _______________________________________________ ________
Guys - I am in need of two roller, bearing and spacers. I have a Hazer II and its missing these few parts. I can only purchase an entire set from GM, I only need two the others are in new condition.
Hey guys - I picked up an old school antenna and I am trying to ID it so I can find a manual or figure out how to set up a trap it has. Its 32' long and all 1/4" wall aluminum with a large cap hat di
Hey guys - I have a 32' vertical I'm installing. I searched the post files but didnt see a related msg reply. What would be a good number of radials to put down and what lengths for 80m - 10m ?? I kn
A previous post suggested a spark plug on each terminal the ladder line connected to. So the resister would go from each terminal and tie the other end to a ground rod ? I run 250' center feed 450 la