Hello Everyone: I need to locate a bearing for a prop pitch motor. The bearing is a MRC G 203 R1. MRC has ignored my e-mails. Detroit ball bearing does not have one. This bearing goes on the low spee
Hello Everyone: I have a 60' commercial grade steel (tapered) free standing tower that I want to fit with an elevator system. It is in 10 cubic yards of concrete and has one set of guys at 40' ( I li
My Weller 100/260 Watt soldering gun works fine for soldering PL 259's inside or outside. However, I have found that the connections between the soldering gun tip holders and the tip gets corroded an
I have lashed the mast to the bottom of my vehicle. This works very well. Remember to use a red flag on the end protruding from the rear of the car! Alton, NU8L ______________________________________
reMorning Everyone: I am finishing up the rebuild of a small prop pitch motor. We all know the MRC 0017 bearing that is located in the adapter plate is no longer available. My MRC 0017 races look ok
I am having a problem with a brush in a small prop pitch electric motor. I disassembled the electric motor and replaced the beaings. When I was putting the motor back together, I noticed that one of
I have a 4 element quad. No issues with rain or snow static. Alton NU8L Sent from my Verizon Motorola Smartphone On Dec 2, 2018 9:58 PM, john@kk9a.com wrote: Rain static in a contest is definitely no
I believe the reason why quads do not exhibit rain or snow static is because the driven element is at DC ground. I feed mine with a tri gamma match Sent from Samsung tablet __________________________
I run #12 stranded house wire, 240 feet m/l, using a 1:4 balun. Works 180m through 10m with a MFJ 993 BRT tuner. I run bare wire. Easy enough to make a wire stripper with some wood and a heavy duty r
Apologies! I misread the title line Inverted V not inverted L! My information is for my Inverted L! 73, Alton, NU8L Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows I run #1
I digitized a paper copy of the manual provided to me by Joel K2QBV (SK) a number of years ago. It is 100mb in size. It also contains some notes from various Hams. I used it to rebuild my prop pitch