Mail Archive Search: <+from:barry@w2up.wells.com>

Results:

References: [ +from:barry@w2up.wells.com: 8 ]

Total 8 documents matching your query.

1. Stacked TH7's (score: 1): Author: barry@w2up.wells.com (barry); Date: Thu, 01 Aug 96 12:21:05 EDT; Would it make sense (and save on the complexity and expense of a rotating tower) to rotate the top TH7 with a conventional rotor, and rotate the lower one(s) with a Ringrotor or a sidemount? I find t; /archives//html/Towertalk/1996-08/msg00012.html (8,257 bytes)
2. Wasps (score: 1): Author: barry@w2up.wells.com (Barry Kutner); Date: Sun, 04 Aug 96 22:25:24 GMT; My solution - I ALWAYS carry a can of the stuff up in my backpack. And when I spray it, I make sure I know the wind direction! Other than that, I've tried to eliminate places where they tend to built; /archives//html/Towertalk/1996-08/msg00058.html (8,044 bytes)
3. Wasps (score: 1): Author: barry@w2up.wells.com (Barry Kutner); Date: Wed, 07 Aug 96 16:06:38 GMT; Adolph's contains an enzyme called papain (comes from either the pineapple or papaya). It breaks down proteins, including bee venom. Another helpful thing is the goop in an Aloe Vera plant. Just brea; /archives//html/Towertalk/1996-08/msg00074.html (8,838 bytes)
4. Phylli (score: 1): Author: barry@w2up.wells.com (barry); Date: Wed, 07 Aug 96 17:33:17 EDT; I performed a little experiment. I put the Loos tension gauge on my Philly guy and noted the reading. I then put it on the 3/16 EHS tail (about 15 ft long) on the same guy, and the reading was just a; /archives//html/Towertalk/1996-08/msg00084.html (7,780 bytes)
5. Hygain 52' Crankup - good for me? (score: 1): Author: barry@w2up.wells.com (barry); Date: Mon, 01 Jul 96 11:21:17 EDT; Steve has a TH7, which per Tony, is 1 db better than the C3. Why is it a good move to swap it, if the TH7 is a better performer? My 2 TH7s have performed flawlessly, electrically and mechanically, si; /archives//html/Towertalk/1996-07/msg00008.html (7,576 bytes)
6. Hello! (score: 1): Author: barry@w2up.wells.com (barry); Date: Mon, 03 Jun 96 10:40:31 EDT; I'll agree with the above. I've had my ringrotor up for about 2 years. Major problems were intial installation due to poor quality control (holes drilled about 1/4 off center in bracket where motor m; /archives//html/Towertalk/1996-06/msg00010.html (7,855 bytes)
7. Hello! (score: 1): Author: barry@w2up.wells.com (barry); Date: Mon, 03 Jun 96 14:47:14 EDT; Steve - I was going to bring up the sidemount issue, but didn't. SInce you did, let me ask you this: The torque introduced by a sidearm with a mid-sized Yagi seems to be quite a bit. I don't recall s; /archives//html/Towertalk/1996-06/msg00018.html (7,540 bytes)
8. Masts and stacking considerations (score: 1): Author: barry@w2up.wells.com (barry); Date: Fri, 14 Jun 96 13:58:47 EDT; Steve - I believe you are wrong. I don't have the formula handy for calculating tensile strength of a round member, but diameter is the single-most important factor, as it is exponential, not linear.; /archives//html/Towertalk/1996-06/msg00098.html (8,543 bytes)

Current List: 1 - 8
Page: [1]